제조사부품번호

GEORGIN Double Zener Barrier, ATEX

RS 제품 번호:: 230-9461
제조사 부품 번호:: BZG788PLUS
제조업체:: GEORGIN

Subtotal (1 Box of 1 unit)*

₩290,772.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

Box(es)	Per Box
1 +	₩290,772.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 230-9461
제조사 부품 번호:: BZG788PLUS
제조업체:: GEORGIN

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	GEORGIN
	Product Type	Double Zener Barrier
	Number of Channels	1
	Barrier Type	Zener Barrier
	Mount Type	DIN Rail
	Hazardous Area Certification	ATEX
	Terminal Type	Screw
	IP Rating	IP20
	Supply Voltage	26.8V
	Maximum Safety Voltage	28V
	Maximum Safety Current	245.11mA
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	IECEx IEC 60079-0/IEC 60079-11/IEC 60079-15/IEC 61241-11/IEC 61241-0, D.B.T. NFC 15-100, ATEX EN 60079-0/EN 60079-11/EN 60079-15/EN 61241-11/EN 61241-0, C.E.M. EN 61326-1 & IEC61000-6-2, SIL EN 61508 (SIL 2 or SIL 3)
	Series	BZG

	모두 선택
	브랜드 GEORGIN
	Product Type Double Zener Barrier
	Number of Channels 1
	Barrier Type Zener Barrier
	Mount Type DIN Rail
	Hazardous Area Certification ATEX
	Terminal Type Screw
	IP Rating IP20
	Supply Voltage 26.8V
	Maximum Safety Voltage 28V
	Maximum Safety Current 245.11mA
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Standards/Approvals IECEx IEC 60079-0/IEC 60079-11/IEC 60079-15/IEC 61241-11/IEC 61241-0, D.B.T. NFC 15-100, ATEX EN 60079-0/EN 60079-11/EN 60079-15/EN 61241-11/EN 61241-0, C.E.M. EN 61326-1 & IEC61000-6-2, SIL EN 61508 (SIL 2 or SIL 3)
	Series BZG

Datasheet - BZG788PLUS

COO (Country of Origin):: FR

Zener barriers contribute to the intrinsic safety [Ex i] and are installed in safe areas. Their mission is to limit the level of energy that may appear in an electric circuit routed through a potentially explosive area, whatever the connection established upstream of the barrier.

A barrier is made up of:

- resistors that limit the current

- Zener diodes that limit the voltage

- fuses that protect the components

When a fault voltage is applied across the input terminals of the barrier, the voltage that may appear in the explosive zone is limited by a Zener diode, which is in turn protected by a fuse.

The current is limited to an acceptable value by the resistor.

They can be installed in zone 2, thanks to the Ex nA certification in an IP 54 housing.

Zener barrier for analogic signals

Polyester enclosure / DIN Rail mounting

For floating potential wiring

3/4: U0=28V I0=83.97mA P0=587.79mW

2/3: Ua=26.8V Ifm=50mA RL=311.3ohm

Number of channels: 1

Screw terminals

Option: Without

ATEX / IECEx informations:

INERIS 11ATEX0024X / IECEx INE11.0009X

Group II (surface) - category (1) G/D

II(1) GD [Ex ia Ga] IIC, IIB or [Ex iaD Da] IIIC

II3(1) G Ex nA [ia Ga] IIC T4 Gc

Installation in safe zone or zone 2

For equipment installed in zone 0,1,2,20,21,22

See leaflet for a safe use

GEORGIN Double Zener Barrier, ATEX

관련된 링크들