제조사부품번호

GEORGIN Double Zener Barrier, Process Signal, ATEX

RS 제품 번호:: 230-9458
제조사 부품 번호:: BZG767PLUS
제조업체:: GEORGIN

GEORGIN Double Zener Barrier, Process Signal, ATEX

Subtotal (1 Box of 1 unit)*

₩290,772.00

일시적 품절

2026년 11월 04일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

Box(es)	Per Box
1 +	₩290,772.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 230-9458
제조사 부품 번호:: BZG767PLUS
제조업체:: GEORGIN

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	GEORGIN
	Number of Channels	1
	Product Type	Double Zener Barrier
	Barrier Type	Zener Barrier
	Mount Type	DIN Rail
	Hazardous Area Certification	ATEX
	Terminal Type	Screw
	Supply Voltage	13.8V
	IP Rating	IP20
	Minimum Operating Temperature	-20°C
	Signal Type	Process Signal
	Maximum Safety Voltage	13.8V
	Maximum Safety Current	302.84mA
	Maximum Operating Temperature	60°C
	Standards/Approvals	ATEX EN 60079-0/EN 60079-11/EN 60079-15/EN 61241-11/EN 61241-0, IECEx IEC 60079-0/IEC 60079-11/IEC 60079-15/IEC 61241-11/IEC 61241-0, SIL EN 61508, C.E.M. EN 61326-1 & IEC61000-6-2, D.B.T. NFC 15-100
	Series	BZG

	모두 선택
	브랜드 GEORGIN
	Number of Channels 1
	Product Type Double Zener Barrier
	Barrier Type Zener Barrier
	Mount Type DIN Rail
	Hazardous Area Certification ATEX
	Terminal Type Screw
	Supply Voltage 13.8V
	IP Rating IP20
	Minimum Operating Temperature -20°C
	Signal Type Process Signal
	Maximum Safety Voltage 13.8V
	Maximum Safety Current 302.84mA
	Maximum Operating Temperature 60°C
	Standards/Approvals ATEX EN 60079-0/EN 60079-11/EN 60079-15/EN 61241-11/EN 61241-0, IECEx IEC 60079-0/IEC 60079-11/IEC 60079-15/IEC 61241-11/IEC 61241-0, SIL EN 61508, C.E.M. EN 61326-1 & IEC61000-6-2, D.B.T. NFC 15-100
	Series BZG

Datasheet - BZG767PLUS

COO (Country of Origin):: FR

Zener barriers contribute to the intrinsic safety [Ex i] and are installed in safe areas. Their mission is to limit the level of energy that may appear in an electric circuit routed through a potentially explosive area, whatever the connection established upstream of the barrier.

A barrier is made up of:

- resistors that limit the current

- Zener diodes that limit the voltage

- fuses that protect the components

When a fault voltage is applied across the input terminals of the barrier, the voltage that may appear in the explosive zone is limited by a Zener diode, which is in turn protected by a fuse.

The current is limited to an acceptable value by the resistor.

They can be installed in zone 2, thanks to the Ex nA certification in an IP 54 housing.

Zener barrier for logic signals

Polyester enclosure / DIN Rail mounting

For floating potential wiring

3/4: U0=15.79V I0=83.08mA P0=327.85mW

2/3: Ua=13.8V Ifm=100mA RL=103.6ohm

Number of channels: 1

Screw terminals

ATEX / IECEx informations:

INERIS 11ATEX0024X / IECEx INE11.0009X

Group II (surface) - category (1) G/D

II(1) GD [Ex ia Ga] IIC, IIB or [Ex iaD Da] IIIC

II3(1) G Ex nA [ia Ga] IIC T4 Gc

Installation in safe zone or zone 2

For equipment installed in zone 0,1,2,20,21,22

See leaflet for a safe use

GEORGIN Double Zener Barrier, Process Signal, ATEX

관련된 링크들