GEORGIN 1 Channel Double Zener Barrier, ATEX

Subtotal (1 Box of 1 unit)*

₩285,834.90

Add to Basket
수량 선택 또는 입력
재고있음
  • 5 개 단위 배송 준비 완료
  • 추가로 2026년 5월 22일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Box(es)
Per Box
1 +₩285,834.90

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
230-9459
제조사 부품 번호:
BZG787PLUS
제조업체:
GEORGIN
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

GEORGIN

Number of Channels

1

Product Type

Double Zener Barrier

Barrier Type

Zener Barrier

Mount Type

DIN Rail

Hazardous Area Certification

ATEX

Terminal Type

Screw

IP Rating

IP20

Maximum Safety Current

89.31mA

Minimum Operating Temperature

-20°C

Maximum Safety Voltage

28V

Maximum Operating Temperature

60°C

Standards/Approvals

D.B.T. NFC 15-100, SIL EN 61508 (SIL 2 or SIL 3 according to application), ATEX EN 60079-0 / EN 60079-11 / EN 60079-15 / EN 61241-11 / EN 61241-0, IECEx IEC 60079-0 / IEC 60079-11 / IEC 60079-15 / IEC 61241-11 / IEC 61241-0, C.E.M. EN 61326-1 & IEC61000-6-2

Series

BZG

Zener barriers contribute to the intrinsic safety [Ex i] and are installed in safe areas. Their mission is to limit the level of energy that may appear in an electric circuit routed through a potentially explosive area, whatever the connection established upstream of the barrier.

A barrier is made up of:

- resistors that limit the current

- Zener diodes that limit the voltage

- fuses that protect the components

When a fault voltage is applied across the input terminals of the barrier, the voltage that may appear in the explosive zone is limited by a Zener diode, which is in turn protected by a fuse.

The current is limited to an acceptable value by the resistor.

They can be installed in zone 2, thanks to the Ex nA certification in an IP 54 housing.

Zener barrier for analogic signals

Polyester enclosure / DIN Rail mounting

For floating potential wiring

3/4: U0=28V I0=89.31mA P0=625.2mW

2/3: Ua=26.8V Ifm=50mA RL=341.3ohm

Number of channels: 1

Screw terminals

ATEX / IECEx informations:

INERIS 11ATEX0024X / IECEx INE11.0009X

Group II (surface) - category (1) G/D

II(1) GD [Ex ia Ga] IIC, IIB or [Ex iaD Da] IIIC

II3(1) G Ex nA [ia Ga] IIC T4 Gc

Installation in safe zone or zone 2

For equipment installed in zone 0,1,2,20,21,22

See leaflet for a safe use

관련된 링크들