Festo Pneumatic 2 Port Actuated Ball Valve - Actuator

모든 Valve Actuators 열람하기
현재 이용 불가
이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.
RS 제품 번호:
271-7844
제조사 부품 번호:
VZBC-80-FF-16-22-F07-V4V4T-PS180-R-90-4-C
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Product Type

Actuated Ball Valve

Number of Ports Supported

2

Actuator Type

Pneumatic

Function

Actuator

Standards/Approvals

ATEX, ISO 8573-1:2010

Model Number

1915409

COO (Country of Origin):
DE

Festo Actuated Ball Valve, Pneumatic Actuator, 2 Ports Supported - VZBC-80-FF-16-22-F07-V4V4T-PS180-R-90-4-C, Numeric Part Number:1915409


This actuated ball valve provides automated flow control using a pneumatic semi-rotary drive, designed for inline installation in systems handling compressed air, inert gases and NEUTRAL fluids. It operates across a wide media temperature range and is suitable for applications requiring explosion-protected equipment within specified ambient conditions.

Features and Benefits:


• 2-way design offers straightforward on/off flow control
• Pneumatic actuation enables Rapid switching at 6 bar-8.4 bar
• DN80 porting delivers high throughput with Kv905 m³/h
• High-alloy stainless-steel body resists dense corrosion environments
• PTFE-reinforced Seals permit media temperatures up to 200 °C
• ATEX-certified assembly allows use in Zones 1/2/21/22

Applications


• Suitable for compressed Air distribution systems in plants
• Ideal for hazardous-area pneumatic valve automation
• Used with NEUTRAL fluids and inert gas handling trains
• Can be used for high-flow process line isolation tasks
• Suitable for systems requiring lubricated pilot operation

What explosion protection classifications does it meet?


It is certified for Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.

Which materials are used for wetted components?


The ball and housing are high-alloy stainless steel with PTFE-based seals.

What operating medium quality is required?


Compressed Air conforming to ISO 8573-1:2010 is specified for operation.

What ambient temperature limits apply to the assembly?


The assembly is rated for use between −10 °C and +80 °C.

Is lubricated operation acceptable and when required?


Lubrication is permissible and, if used, becomes a permanent requirement.

관련된 링크들