제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	Controller IC
	Number of Transceivers	4
	Sub Type	Controller
	USB Specification	USB 2.0
	Power Supply Type	Single
	ESD Protection	Yes
	Maximum Supply Voltage	5V
	Minimum Supply Voltage	5V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	28
	Supported Protocols	USB 2.0
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	70°C
	Width	5 mm
	Height	0.7mm
	Length	5mm
	Series	CY7C65632
	Standards/Approvals	No
	Automotive Standard	No
	Supply Current	105.4mA

	모두 선택
	브랜드 Infineon
	Product Type Controller IC
	Number of Transceivers 4
	Sub Type Controller
	USB Specification USB 2.0
	Power Supply Type Single
	ESD Protection Yes
	Maximum Supply Voltage 5V
	Minimum Supply Voltage 5V
	Mount Type Surface
	Package Type QFN
	Pin Count 28
	Supported Protocols USB 2.0
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 70°C
	Width 5 mm
	Height 0.7mm
	Length 5mm
	Series CY7C65632
	Standards/Approvals No
	Automotive Standard No
	Supply Current 105.4mA

High performance, low-power USB 2.0 Hub, optimized for low cost designs with minimum Bill-of-material USB 2.0 hub controller

Compliant with USB 2.0 specification, TID# 30000060

Up to four downstream ports support

Downstream ports are backward compatible with FS, LS

Single transaction translator (TT) for low cost

Very low power consumption

Supports bus-powered and self-powered modes

Auto switching between bus-powered and self-powered

Single MCU with 2K ROM and 64 byte RAM

Lowest power consumption

Highly integrated solution for reduced BOM cost

Internal regulator – single power supply 5 V required

Provision of connecting 3.3 V with external regulator

Integrated upstream pull-up resistor

Integrated pull-down resistors for all downstream ports

Integrated upstream/downstream termination resistors

Integrated port status indicator control

12 MHz +/– 500 ppm external crystal with drive level 600 μW

(integrated PLL) clock input with optional 27/48 MHz

oscillator clock input

Internal power failure detection for ESD recovery

Downstream port management

Support individual and ganged mode power management

Overcurrent detection

Two port status indicators per downstream port

Maximum configurability

VID and PID are configurable through external EEPROM

Number of ports, removable/non-removable ports are

configurable through EEPROM and I/O pin configuration

I/O pins can configure gang/individual mode power switching, reference clock source and polarity of powerswitch enable pin

Configuration options also available through mask ROM

Available in space saving 48-pin (7 x 7 mm) TQFP and 28-pin (5 x 5 mm) QFN packages

Supports 0 °C to 70 °C temperature range

Infineon CY7C65632-28LTXCT, Controller IC, 4-Channel, 5 V, USB 2.0, 5 V, 28-Pin QFN

관련된 링크들