Infineon, Controller IC, 4-Channel, 5 V, USB 2.0, 5 V, 48-Pin TQFP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 reel of 1500 units)*

₩5,219,820.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 1월 19일 부터 1,500 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
1500 - 6000₩3,479.88₩5,220,666.00
7500 +₩3,410.32₩5,116,326.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
181-7455
제조사 부품 번호:
CY7C65632-48AXCT
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Product Type

Controller IC

Number of Transceivers

4

Sub Type

Controller

USB Specification

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Minimum Supply Voltage

5V

Maximum Supply Voltage

5V

Mount Type

Surface

Package Type

TQFP

Pin Count

48

Minimum Operating Temperature

0°C

Supported Protocols

USB 2.0

Maximum Operating Temperature

70°C

Length

7mm

Series

CY7C65632

Width

7 mm

Height

1.4mm

Standards/Approvals

No

Automotive Standard

No

Supply Current

105.4mA

High performance, low-power USB 2.0 Hub, optimized for low cost designs with minimum Bill-of-material

USB 2.0 hub controller

Compliant with USB 2.0 specification, TID# 30000060

Up to four downstream ports support

Downstream ports are backward compatible with FS, LS

Single transaction translator (TT) for low cost

Very low power consumption

Supports bus-powered and self-powered modes

Auto switching between bus-powered and self-powered

Single MCU with 2K ROM and 64 byte RAM

Lowest power consumption

Highly integrated solution for reduced BOM cost

Internal regulator single power supply 5 V required

Provision of connecting 3.3 V with external regulator

Integrated upstream pull-up resistor

Integrated pull-down resistors for all downstream ports

Integrated upstream/downstream termination resistors

Integrated port status indicator control

12 MHz +/500 ppm external crystal with drive level 600 μW (integrated PLL) clock input with optional 27/48 MHz oscillator clock input

Internal power failure detection for ESD recovery

Downstream port management

Support individual and ganged mode power management

Overcurrent detection

Two port status indicators per downstream port

Maximum configurability

VID and PID are configurable through external EEPROM

Number of ports, removable/non-removable ports are configurable through EEPROM and I/O pin configuration

I/O pins can configure gang/individual mode power switching, reference clock source and polarity of power switch enable pin

Configuration options also available through mask ROM Available in space saving 48-pin (7 x 7 mm) TQFP and 28-pin 5 x 5 mm) QFN packages Supports 0 °C to 70 °C temperature range

관련된 링크들