Infineon, Controller IC, 4-Channel, 5 V, USB 2.0, 5 V, 28-Pin QFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 USB Interface ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 2500 units)*

₩6,251,000.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 10월 05일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
2500 - 2500₩2,500.40₩6,248,650.00
5000 - 7500₩2,449.64₩6,123,630.00
10000 +₩2,400.76₩6,000,960.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
184-0041
제조사 부품 번호:
CY7C65632-28LTXCT
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Number of Transceivers

4

Product Type

Controller IC

Sub Type

Controller

USB Specification

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

5V

Minimum Supply Voltage

5V

Mount Type

Surface

Package Type

QFN

Pin Count

28

Minimum Operating Temperature

0°C

Supported Protocols

USB 2.0

Maximum Operating Temperature

70°C

Series

CY7C65632

Height

0.7mm

Length

5mm

Standards/Approvals

No

Width

5 mm

Automotive Standard

No

Supply Current

105.4mA

High performance, low-power USB 2.0 Hub, optimized for low cost designs with minimum Bill-of-material USB 2.0 hub controller

Compliant with USB 2.0 specification, TID# 30000060

Up to four downstream ports support

Downstream ports are backward compatible with FS, LS

Single transaction translator (TT) for low cost

Very low power consumption

Supports bus-powered and self-powered modes

Auto switching between bus-powered and self-powered

Single MCU with 2K ROM and 64 byte RAM

Lowest power consumption

Highly integrated solution for reduced BOM cost

Internal regulator – single power supply 5 V required

Provision of connecting 3.3 V with external regulator

Integrated upstream pull-up resistor

Integrated pull-down resistors for all downstream ports

Integrated upstream/downstream termination resistors

Integrated port status indicator control

12 MHz +/– 500 ppm external crystal with drive level 600 μW

(integrated PLL) clock input with optional 27/48 MHz

oscillator clock input

Internal power failure detection for ESD recovery

Downstream port management

Support individual and ganged mode power management

Overcurrent detection

Two port status indicators per downstream port

Maximum configurability

VID and PID are configurable through external EEPROM

Number of ports, removable/non-removable ports are

configurable through EEPROM and I/O pin configuration

I/O pins can configure gang/individual mode power switching, reference clock source and polarity of powerswitch enable pin

Configuration options also available through mask ROM

Available in space saving 48-pin (7 x 7 mm) TQFP and 28-pin (5 x 5 mm) QFN packages

Supports 0 °C to 70 °C temperature range

관련된 링크들