제조사부품번호

Nuvotem Talema 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 800 VA, VDE, UL

RS 제품 번호:: 223-8392
제조사 부품 번호:: 0800P1-2-055
제조업체:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 800 VA, VDE, UL

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩353,045.20

재고있음

6 개 단위 배송 준비 완료
추가로 2026년 7월 27일 부터 18 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 24	₩353,045.20
25 +	₩340,693.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 223-8392
제조사 부품 번호:: 0800P1-2-055
제조업체:: Nuvotem Talema

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nuvotem Talema
	Product Type	Toroidal Transformer
	Primary Voltage	230 V ac
	Secondary Voltage	2 x 55 V ac
	Number of Outputs	2
	Secondary Current	7.27 A
	Weight	5.1kg
	Power	800VA
	Diameter	162 mm
	Minimum Operating Temperature	0°C
	Winding Type	Dual Secondary
	Toroid Centre	Potted
	Maximum Operating Frequency	450Hz
	Maximum Operating Temperature	120°C
	Termination Type	Copper Conductor Termination Wire
	Height	60mm
	Standards/Approvals	VDE, UL

	모두 선택
	브랜드 Nuvotem Talema
	Product Type Toroidal Transformer
	Primary Voltage 230 V ac
	Secondary Voltage 2 x 55 V ac
	Number of Outputs 2
	Secondary Current 7.27 A
	Weight 5.1kg
	Power 800VA
	Diameter 162 mm
	Minimum Operating Temperature 0°C
	Winding Type Dual Secondary
	Toroid Centre Potted
	Maximum Operating Frequency 450Hz
	Maximum Operating Temperature 120°C
	Termination Type Copper Conductor Termination Wire
	Height 60mm
	Standards/Approvals VDE, UL

Datasheet

COO (Country of Origin):: CZ

Open Style with Leads, 15VA to 1000VA

High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field and very low induced noise (hum)

Very low iron losses

Double insulated primary leads

100% electrical and flash tested

High-quality manufacturing and testing in accordance to EN61558, EN60950, EN60065, VDE 0551, VDE 0550 and BS415

Approvals

UL 506; EN 61558

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Standards