제조사부품번호

Nuvotem Talema 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 160 VA, VDE, UL

RS 제품 번호:: 223-8128
제조사 부품 번호:: 0160P1-2-055
제조업체:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 160 VA, VDE, UL

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

현재 비가용

죄송합니다. 언제 재입고될지 모릅니다.

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

RS PRO 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 160 VA, IEC 61558 Class II, UL 506, EN 61558 Class II, RoHS,

RS 제품 번호: 671-9022

개당

₩72,436.40

RS 제품 번호:: 223-8128
제조사 부품 번호:: 0160P1-2-055
제조업체:: Nuvotem Talema

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nuvotem Talema
	Primary Voltage	230 V ac
	Product Type	Toroidal Transformer
	Secondary Voltage	2 x 55 V ac
	Number of Outputs	2
	Secondary Current	1.45 A
	Power	160VA
	Weight	1.5kg
	Diameter	105 mm
	Maximum Operating Frequency	450Hz
	Winding Type	Dual Secondary
	Minimum Operating Temperature	0°C
	Toroid Centre	Potted
	Maximum Operating Temperature	120°C
	Height	42mm
	Termination Type	Copper Conductor Termination Wire
	Standards/Approvals	VDE, UL

	모두 선택
	브랜드 Nuvotem Talema
	Primary Voltage 230 V ac
	Product Type Toroidal Transformer
	Secondary Voltage 2 x 55 V ac
	Number of Outputs 2
	Secondary Current 1.45 A
	Power 160VA
	Weight 1.5kg
	Diameter 105 mm
	Maximum Operating Frequency 450Hz
	Winding Type Dual Secondary
	Minimum Operating Temperature 0°C
	Toroid Centre Potted
	Maximum Operating Temperature 120°C
	Height 42mm
	Termination Type Copper Conductor Termination Wire
	Standards/Approvals VDE, UL

Datasheet

Open Style with Leads, 15VA to 1000VA

High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field and very low induced noise (hum)

Very low iron losses

Double insulated primary leads

100% electrical and flash tested

High-quality manufacturing and testing in accordance to EN61558, EN60950, EN60065, VDE 0551, VDE 0550 and BS415

Approvals

UL 506; EN 61558

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Standards