제조사부품번호

Nuvotem Talema 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 80 VA, UL, VDE

RS 제품 번호:: 223-8005
제조사 부품 번호:: 0080P1-2-055
제조업체:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 55 V ac Toroidal Transformer 2 Output 80 VA, UL, VDE

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩73,019.20

마지막 RS 재고

최종적인 1 개 unit(s)이 배송 준비 됨

수량	한팩당
1 - 24	₩73,019.20
25 +	₩70,462.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 223-8005
제조사 부품 번호:: 0080P1-2-055
제조업체:: Nuvotem Talema

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nuvotem Talema
	Primary Voltage	230 V ac
	Product Type	Toroidal Transformer
	Secondary Voltage	2 x 55 V ac
	Number of Outputs	2
	Secondary Current	730 mA
	Weight	900g
	Power	80VA
	Diameter	93 mm
	Winding Type	Dual Secondary
	Maximum Operating Frequency	450Hz
	Toroid Centre	Potted
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	120°C
	Termination Type	Copper Conductor Termination Wire
	Height	38mm
	Standards/Approvals	UL, VDE

	모두 선택
	브랜드 Nuvotem Talema
	Primary Voltage 230 V ac
	Product Type Toroidal Transformer
	Secondary Voltage 2 x 55 V ac
	Number of Outputs 2
	Secondary Current 730 mA
	Weight 900g
	Power 80VA
	Diameter 93 mm
	Winding Type Dual Secondary
	Maximum Operating Frequency 450Hz
	Toroid Centre Potted
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 120°C
	Termination Type Copper Conductor Termination Wire
	Height 38mm
	Standards/Approvals UL, VDE

Datasheet

Open Style with Leads, 15VA to 1000VA

High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field and very low induced noise (hum)

Very low iron losses

Double insulated primary leads

100% electrical and flash tested

High-quality manufacturing and testing in accordance to EN61558, EN60950, EN60065, VDE 0551, VDE 0550 and BS415

Approvals

UL 506; EN 61558

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Standards