Keenserts 1 piece Threaded Insert Hand Tool

모든 Thread Repair Kits 열람하기
일시적 품절
RS 제품 번호:
668-4698
제조사 부품 번호:
KRTM10-01
제조업체:
Keenserts
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Keenserts

Product Type

Threaded Insert Hand Tool

Number of Pieces

1

Standards/Approvals

EN 2516, ISO/TS 16949:2002, DIN EN ISO 14001:2005

제외

COO (Country of Origin):
DE

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel

Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials

In thread repair use, the defect thread can be replaced with the same nominal diameter

Significantly increases load capability in weaker materials

Special keys lock the Keensert into place eliminating rotation

Easy to install no special taps required and no tangs to remove

High resistance to torque out and pull out

Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

관련된 링크들