Keenserts Thread Repair Insert, M8 x 1.25, Drill Size 11.5mm

모든 Thread Repair Inserts 열람하기

Subtotal (1 Bag of 5 units)*

₩96,143.20

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보
Bag(s)
Per Bag
한팩당*
1 +₩96,143.20₩19,228.64

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
668-4708
제조사 부품 번호:
KNHM8X1.25
제조업체:
Keenserts
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Keenserts

Thread Size

M8 x 1.25

Drill Size

11.5mm

Thread Length

14mm

제외

COO (Country of Origin):
DE

Keenserts Inserts



The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.


Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

관련된 링크들