Keenserts Thread Repair Insert, M10 x 1.5, Drill Size 13.5mm
- RS 제품 번호:
- 668-4702
- 제조사 부품 번호:
- KNHM10X1.5
- 제조업체:
- Keenserts
Subtotal (1 Bag of 3 units)*
₩61,006.00
일시적 품절
- 2026년 3월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Bag(s) | Per Bag | 한팩당* |
|---|---|---|
| 1 + | ₩61,006.00 | ₩20,335.96 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 668-4702
- 제조사 부품 번호:
- KNHM10X1.5
- 제조업체:
- Keenserts
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Keenserts | |
| Thread Size | M10 x 1.5 | |
| Drill Size | 13.5mm | |
| Thread Length | 16mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Keenserts | ||
Thread Size M10 x 1.5 | ||
Drill Size 13.5mm | ||
Thread Length 16mm | ||
제외
- COO (Country of Origin):
- DE
Keenserts Inserts
The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions
The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691
관련된 링크들
- Keenserts Thread Repair Insert, M6 x 1, Drill Size 9.5mm
- Keenserts Thread Repair Insert, M8 x 1.25, Drill Size 11.5mm
- Keenserts Thread Repair Insert, M12 x 1.75, Drill Size 15.5mm
- Keenserts Thread Repair Insert, M10 x 1.5, Drill Size 11.5mm
- Keenserts Thread Repair Insert, M5 x 0.8, Drill Size 5.5mm
- Keenserts Thread Repair Insert, M6 x 1, Drill Size 7.5mm
- Keenserts Thread Repair Insert, M12 x 1.75, Drill Size 13.5mm
- Keenserts Thread Repair Insert, M8 x 1.25, Drill Size 9.5mm