MG Chemicals Boron Nitride, Zinc Oxide, Aluminium Oxide Thermal Grease, 1.8 W/mK, Tube
- RS 제품 번호:
- 124-7690
- 제조사 부품 번호:
- 8616-25ml
- 제조업체:
- MG Chemicals
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩41,223.00
재고있음
- 22 개 단위 배송 준비 완료
- 추가로 다른 지역에서 38 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 14 | ₩41,223.00 |
| 15 - 39 | ₩39,546.00 |
| 40 + | ₩38,707.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 124-7690
- 제조사 부품 번호:
- 8616-25ml
- 제조업체:
- MG Chemicals
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | MG Chemicals | |
| Thermal Conductivity | 1.8W/mK | |
| Product Type | Thermal Grease | |
| Physical State | Paste | |
| Package Size | 25 ml | |
| Dispensing Method | Tube | |
| Standards/Approvals | RoHS | |
| Maximum Operating Temperature | 165°C | |
| Minimum Operating Temperature | -68°C | |
| Chemical Component | Boron Nitride, Zinc Oxide, Aluminium Oxide | |
| 모두 선택 | ||
|---|---|---|
브랜드 MG Chemicals | ||
Thermal Conductivity 1.8W/mK | ||
Product Type Thermal Grease | ||
Physical State Paste | ||
Package Size 25 ml | ||
Dispensing Method Tube | ||
Standards/Approvals RoHS | ||
Maximum Operating Temperature 165°C | ||
Minimum Operating Temperature -68°C | ||
Chemical Component Boron Nitride, Zinc Oxide, Aluminium Oxide | ||
- COO (Country of Origin):
- CA
MG Chemicals Super Thermal grease II
MG Chemical 8616 super thermal grease II is a synthetic oil-based low thermal resistant grease. Designed for those applications where the maximum heat flow is a must.;The thermal grease is available in a 3 ml syringe 124-7689, a 25 ml tub 124-7690 or a 85 ml tube 124-7691
Features and Benefits
Silicone free;High dielectric strength ;Non-corrosive;No metallic fillers;Safe on plastics
Typical Applications
Use when you want to improve the thermal interface contact conductivity between heat sinks, LEDs, motors, and heat-generating electronic components. Such as CPUs, GPU chipsets and power components. ;Use to improve the thermal interface between irregular and pitted surfaces.
Note
The thermal grease does not add mechanical strength to the bond between heat source and heat sink. Use a mechanical fixation mechanism such as screws, allowing for pressure between the two, spreading the thermal grease onto the heat source.