P.M.A KS92 Panel PID Temperature Controller, 4 Output Relay 260V On-Off

Subtotal (1 unit)*

₩1,236,870.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,236,870.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
607-9248
제조사 부품 번호:
KS92-112-0000D-011
제조업체:
P.M.A
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

P.M.A

Output Type

Relay

Product Type

PID Temperature Controller

Number of Outputs

4

Minimum Operating Temperature

0°C

Maximum Operating Temperature

60°C

Control Type

On-Off

Maximum Supply Voltage

260V

Digital Comms

PROFIBUS-DP Interface, RS422/RS485/Modbus RTU

Auxiliary Power Supply

22 mA, 18 V

Diagnostics

Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm

Display Type

LED, Multi Line

Maximum Voltage

250V

Standards/Approvals

EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)

IP Rating

IP65, IP20, IP00

Width

48mm

Length

118mm

Input Type

Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input

Mount Type

Panel

Series

KS92

Panel Depth

118mm

제외

COO (Country of Origin):
GB

PMA KS 92-1 Temperature Controller


The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.

The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.

The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.

The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.

• BluePort®

• Front interface and BlueControl software

• Maintenance manager and error list

• Two universal inputs

• Day & Night display shows plain text and bargraphs

• Manual gain scheduling

• Self-Tuning to the setpoint without oscillation

• Valve controller with position feedback and DAC monitoring

• 3-point controller for water, fan and oil cooling

• Type tested to EN 14597 (replaces DIN 3440) and cULus

• High-impedance mV input for O2 sensors

PMA Temperature Controllers


관련된 링크들