P.M.A KS50 Panel PID Temperature Controller 5 Input, 3 Output Optocoupler, Relay, Analogue (Current/Voltage), Logic 260V

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩1,086,598.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,086,598.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
418-5111
제조사 부품 번호:
KS50-102-0000D-011
제조업체:
P.M.A
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

P.M.A

Product Type

PID Temperature Controller

Output Type

Optocoupler, Relay, Analogue (Current/Voltage), Logic

Number of Inputs

5

Number of Outputs

3

Maximum Operating Temperature

65°C

Minimum Operating Temperature

-20°C

Control Type

3 Point Stepping Control, 2 Point Control (On/Off), PID

Maximum Supply Voltage

260V ac

Diagnostics

Maintenance Manager and Error List

Digital Comms

RS422/RS485/Modbus RTU

Auxiliary Power Supply

22 mA, 18 V

Display Type

LED With 7 Segments

Maximum Voltage

250V ac

Length

118mm

IP Rating

IP65

Standards/Approvals

EN14597, cULus, EN 61326-1, EN 61010-1

Width

96mm

Mount Type

Panel

Series

KS50

Input Type

Thermocouple, Voltage, Current

Panel Depth

118mm

제외

COO (Country of Origin):
GB

PMA KS 50-1 Temperature Controller


The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.

The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.

• Universal continuous/switching version, i.e. reduced stocks

• 100ms cycle time, i.e. also suitable for fast control loops

• 20ms as shortest pulse for very fast / strong actuators

• Freely configurable analog output, e.g. as process value output

• Customer-specific linearisation for all sensors

• Settings can be blocked via password and internal switch for high security

• Extended temperature range up to 60 °C allows mounting close to the process

• Easy 2-point or offset measurement correction

• Emergency operation after sensor break by means of the "output hold" function

• Logical combination of digital outputs, e.g. for general alarm

• Programmer with 10 segments and "end" signal

• RS 422/485 Modbus RTU interface

• Built-in transmitter power supply

• Splash-water proof front (IP65)

PMA Temperature Controllers


관련된 링크들