P.M.A KS50 Panel PID Temperature Controller, 2 Output Relay 260V ac On-Off

RS 제품 번호:: 736-4871
제조사 부품 번호:: KS50-100-0000D-000
제조업체:: P.M.A

P.M.A KS50 Panel PID Temperature Controller, 2 Output Relay 260V ac On-Off

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩1,049,026.84

제조사가 재고 비축중

2026년 4월 20일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,049,026.84

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 736-4871
제조사 부품 번호:: KS50-100-0000D-000
제조업체:: P.M.A

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	P.M.A
	Output Type	Relay
	Product Type	PID Temperature Controller
	Number of Outputs	2
	Maximum Operating Temperature	65°C
	Minimum Operating Temperature	-20°C
	Control Type	On-Off
	Maximum Supply Voltage	260V ac
	Auxiliary Power Supply	22 mA, 18 V
	Digital Comms	RS422/RS485/Modbus RTU
	Diagnostics	Alarm, Error List, Maintenance Manager and Error List
	Maximum Voltage	250V ac
	Display Type	Multi Line, LED
	IP Rating	IP00, IP20, IP65
	Standards/Approvals	EN 61326-1, cULus, EN 61010-1, EN 14597
	Width	96mm
	Length	118mm
	Series	KS50
	Mount Type	Panel
	Input Type	RTD, Universal Thermocouple
	Panel Depth	118mm

	모두 선택
	브랜드 P.M.A
	Output Type Relay
	Product Type PID Temperature Controller
	Number of Outputs 2
	Maximum Operating Temperature 65°C
	Minimum Operating Temperature -20°C
	Control Type On-Off
	Maximum Supply Voltage 260V ac
	Auxiliary Power Supply 22 mA, 18 V
	Digital Comms RS422/RS485/Modbus RTU
	Diagnostics Alarm, Error List, Maintenance Manager and Error List
	Maximum Voltage 250V ac
	Display Type Multi Line, LED
	IP Rating IP00, IP20, IP65
	Standards/Approvals EN 61326-1, cULus, EN 61010-1, EN 14597
	Width 96mm
	Length 118mm
	Series KS50
	Mount Type Panel
	Input Type RTD, Universal Thermocouple
	Panel Depth 118mm

해당 안됨

COO (Country of Origin):: DE

PMA KS 50-1 Temperature Controller

The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.

The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.

• Universal continuous/switching version, i.e. reduced stocks

• 100ms cycle time, i.e. also suitable for fast control loops

• 20ms as shortest pulse for very fast / strong actuators

• Freely configurable analog output, e.g. as process value output

• Customer-specific linearisation for all sensors

• Settings can be blocked via password and internal switch for high security

• Extended temperature range up to 60 °C allows mounting close to the process

• Easy 2-point or offset measurement correction

• Emergency operation after sensor break by means of the "output hold" function

• Logical combination of digital outputs, e.g. for general alarm

• Programmer with 10 segments and "end" signal

• RS 422/485 Modbus RTU interface

• Built-in transmitter power supply

• Splash-water proof front (IP65)

PMA Temperature Controllers

Supplied with

German Manual

P.M.A KS50 Panel PID Temperature Controller, 2 Output Relay 260V ac On-Off

PMA KS 50-1 Temperature Controller

PMA Temperature Controllers

Supplied with

관련된 링크들