Carlo Gavazzi RGC1P DIN Rail, Panel Power Controller AC 250V Analogue

모든 Temperature Controllers 열람하기

Subtotal (1 unit)*

₩363,573.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 54 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩363,573.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
125-0691
Distrelec 제품 번호:
301-65-402
제조사 부품 번호:
RGC1P23V30ED
제조업체:
Carlo Gavazzi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Carlo Gavazzi

Output Type

AC

Product Type

Power Controller

Maximum Current

63A

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Control Type

Analogue

Terminal Type

Screw

Maximum Supply Voltage

250V

Controlled Phases

1

Firing Mode

Soft Starting, X16, X4, Advanced Full Cycle, Phase Angle

Display Type

LED

Maximum Voltage

660V

Standards/Approvals

CSA 22.2 No.14-13, EN50155, EN 60947-4-3, EN61373, RoHS (2011/65/EU), UL508

Width

70 mm

IP Rating

IP20

Length

35.8mm

Series

RGC1P

Input Type

Analogue

Mount Type

DIN Rail, Panel

Panel Depth

99mm

COO (Country of Origin):
MT

Carlo Gavazzi SSR Power Controller


The Carlo Gavazzi RGC1P series SSR power controller has a solid-state contactor supplied with the integrated heatsink. It required analogue input and a current rating of 30A. It is used to control the output power of single-phase loads with an analogue control input. It has selectable switching modes regulated with a knob on the front of the controller. This also allows phase angle control, full-cycle control, advanced full-cycle control, and soft starting. The output of the power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits


100kA short circuit current rating

1-pole analogue switching AC solid-state contactors

2 front LEDs indicate the status of load and control

Control inputs: 4-20 mA, 0V-5V, 1V-5V, 0V-10V, external potentiometer

DIN-rail or panel mounting

Integrated heatsink

Integrated varistor protection on output

Rated operation current up to 63AAC

Rated operational voltage up to 660VAC

Selectable modes of operation are Phase angle, full-cycle x1, x4 or x16, advanced full-cycle specific for short wave infrared heaters and soft starting for limiting inrush current of loads having a high-temperature coefficient

Certifications


CE certified

cULus approved

관련된 링크들