수량

수량 선택 또는 입력

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Carlo Gavazzi
	Output Type	Solid State/AC
	Product Type	Power Controller
	Maximum Current	63A
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Terminal Type	Screw
	Control Type	Analogue
	Maximum Supply Voltage	250V
	Firing Mode	Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle
	Maximum Voltage	1200V
	Display Type	LED
	Length	35.8mm
	Width	103.5 mm
	Standards/Approvals	EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13)
	IP Rating	IP20
	Mount Type	DIN Rail
	Input Type	Analogue
	Series	RGC1P
	Panel Depth	99mm

	모두 선택
	브랜드 Carlo Gavazzi
	Output Type Solid State/AC
	Product Type Power Controller
	Maximum Current 63A
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Terminal Type Screw
	Control Type Analogue
	Maximum Supply Voltage 250V
	Firing Mode Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle
	Maximum Voltage 1200V
	Display Type LED
	Length 35.8mm
	Width 103.5 mm
	Standards/Approvals EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13)
	IP Rating IP20
	Mount Type DIN Rail
	Input Type Analogue
	Series RGC1P
	Panel Depth 99mm

COO (Country of Origin):: MT

RGC1P Series SSR Power Controllers

The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller and allows phase angle control, full cycle control, advanced full cycle control and soft starting.

The output of the RGC1P power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits

• 1-pole analogue switching AC solid-state contactors

• Integrated heatsink

• Selectable modes of operation;

- Phase angle

- Full cycle x1, x4 or x16

- Advanced full cycle specific for short wave infrared heaters

- Soft starting for limiting inrush current of loads having a high temperature coefficient

• Rated operational voltage up to 660 V ac

• Rated operation current up to 63 A ac

• Control inputs: 4-20 mA, 0-5 V, 1-5 V, 0-10 V, external potentiometer

• Integrated varistor protection on output

• 2 Front LEDs indicate status of load and control

• 100 kA short circuit current rating according to UL508

• DIN Rail or panel mounting

Carlo Gavazzi RGC1P DIN Rail Power Controller Solid State/AC 250V Analogue

RGC1P Series SSR Power Controllers

Features and Benefits

관련된 링크들