Siemens RDE Wall Mount Thermostat 1 Input, 2 Output On-Off 3V dc

모든 Temperature Controllers 열람하기

Subtotal (1 unit)*

₩182,867.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩182,867.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
245-175
제조사 부품 번호:
RDE100.1 / S55770-T279
제조업체:
Siemens
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Siemens

Product Type

Thermostat

Output Type

On-Off

Number of Inputs

1

Number of Outputs

2

Maximum Supply Voltage

3V dc

Display Type

LCD

Length

21.5mm

Standards/Approvals

EAC, CE, UKCA

IP Rating

IP20

Mount Type

Wall Mount

Series

RDE

COO (Country of Origin):
CN

Siemens RDE Series Thermostat, 230V Maximum Voltage, Wall Mount Type - RDE100.1 / S55770-T279


This thermostat is a room temperature controller designed for wall mounting in commercial and industrial installations. It provides Basic on–off temperature regulation via an LCD, accepts an external sensor input, and operates from standard mains supply for straightforward integration into building automation and HVAC control schemes.

Features and Benefits:


• 230V AC supply supports direct connection to the mains
• Two independent on–off outputs enable separate circuit control
• Single external input permits remote sensor operation
• LCD offers clear status and setpoint visibility
• IP30 enclosure rating suitable for protected indoor environments

Applications


• Suitable for temperature control in plant rooms and boiler rooms
• Ideal for integration with electrical distribution and control panels
• Used with fan‑coil units requiring simple on–off switching
• Can be used for room‑level control in office and commercial spaces

What supply voltages can it tolerate during installation?


The unit is designed to be powered from 230V AC and has a maximum supply voltage rating that aligns with typical mains limits.

How does it Interface with external sensors?


It accepts a single external input enabling connection to a remote temperature sensor for more representative room measurements.

What outputs are available for controlling heating or equipment?


Two on–off outputs are provided so separate devices or stages can be switched independently.

What environmental conditions limit its placement?


Operational ambient temperature is constrained between +5°C and +35°C and the IP30 enclosure requires installation in non‑exposed indoor locations.

Which approvals ensure conformity for industrial use?


The device complies with recognised regional standards and carries relevant conformity markings for use in its intended markets.

관련된 링크들