Eaton 160A Tag Fuse 76 x 192 mm 3.6kV

This tag fuse provides overcurrent protection for high-voltage motor circuits in industrial settings, designed to act as a secondary protective device for motors and associated equipment. It is intended for use in installations requiring a 3.6 kV-rated protective element and suited to environments where a back-up fuse characteristic is required to support primary protection schemes.

• Rated continuous current of 160A offering defined motor protection
• Back-up speed providing delayed operation under transient overloads
• Conforms to VDE 0670-4 ensuring standardised performance criteria
• Meets IEC 60282-1 for high-voltage fuse behaviour in fault conditions
• DIN 43625 Interface enabling straightforward panel integration
• Width 76mm supports compatibility with tag fuse holders

• Suitable for protecting medium-voltage motor starters in factories
• Ideal for use within motor control centres for back-up protection
• Used for safeguarding induction motors in process automation plants
• Can be used for protection of transformer feeders in 3.6 kV systems

It is specified for operation at 3.6 kV, matching typical medium-voltage motor protection requirements.

The back-up operating characteristic delays opening under short transients while operating on sustained faults, allowing primary protection to act first.

The product carries compliance with VDE 0670-4 and IEC 60282-1 standards, showing adherence to recognised high-voltage fuse criteria.

The overall length and panel Interface follow the DIN 43625 tag format with a 76mm width, enabling fitment into standard tag fuse holders.