RS PRO Hybrid Stepper Motor 2.8V, 0.44Nm Torque, 0.9 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS 제품 번호:
- 535-0401
- 제조업체:
- RS PRO
Subtotal (1 unit)*
₩51,460.50
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩51,460.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 535-0401
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Product Type | Stepper Motor | |
| Sub Type | Hybrid | |
| Step Angle | 0.9° | |
| Holding Torque | 0.44Nm | |
| Voltage | 2.8V | |
| Frame Size | 42.3 x 42.3 mm | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.68A | |
| Winding Arrangement | Bipolar | |
| Shaft Length | 24mm | |
| Resistance Per Phase | 1.65Ω | |
| Depth | 47mm | |
| Standards/Approvals | RoHS Compliant | |
| Width | 42.3mm | |
| Detent Torque | 25mNm | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Product Type Stepper Motor | ||
Sub Type Hybrid | ||
Step Angle 0.9° | ||
Holding Torque 0.44Nm | ||
Voltage 2.8V | ||
Frame Size 42.3 x 42.3 mm | ||
Shaft Diameter 5mm | ||
Current Rating 1.68A | ||
Winding Arrangement Bipolar | ||
Shaft Length 24mm | ||
Resistance Per Phase 1.65Ω | ||
Depth 47mm | ||
Standards/Approvals RoHS Compliant | ||
Width 42.3mm | ||
Detent Torque 25mNm | ||
RS PRO 4 Wire Bipolar Hybrid Stepper Motor 0.9°, 0.44 Nm, 2.8 V, 1.68 A, 4 Wires
A hybrid stepper motor with a 4 wire bipolar winding enabling precision and controlled movements with electric devices. Stepper motors are brushless assemblies that divide a full motor rotation into several smaller, equal steps, for greater precision and higher efficiency at lower speeds. A hybrid stepper model combines both permanent magnet and variable reluctance motor technology to maximize power in small devices.
These motors are commonly found in the field of lasers and optics, where they form part of complex devices such as linear actuators, rotation stages and goniometers. They have a range of commercial uses too, and you'll find them in everything from camera lenses and DVD players to 3D printers.
Features and Benefits
• Step angle of 0.9°
• Holding torque of 0.44 Nm
• Four-wire bipolar winding
• Voltage rating of 2.8 Vdc
• Frame size of 42.3 x 42.3 mm
• Hybrid stepper motor type
• Shaft diameter of 5 mm
• Current rating of 1.68 A
• Shaft length of 24 mm
• Depth of 47 mm
• Resistance per phase of 1.65 Ω
• RoHS (Restriction of Hazardous Substances) compliant product
RS PRO
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.
관련된 링크들
- RS PRO Hybrid Stepper Motor 9.6V, 0.158Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- Sanyo Denki Hybrid Stepper Motor Stepper Motor 24V, 0.39Nm Torque, 1.8 °, 42 x 42 mm Frame, 5 mm Shaft
- Sanyo Denki SANMOTION Series Hybrid Stepper Motor Stepper Motor 24V, 0.37Nm Torque, 1.8 °, 42 x 42 mm Frame, 5 mm Shaft
- RS PRO Hybrid Stepper Motor 12V, 0.158Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- Sanyo Denki 103H5 Series Hybrid Stepper Motor Stepper Motor 24V, 0.2Nm Torque, 1.8 °, 42 x 42 mm Frame, 5 mm Shaft
- Sanyo Denki 103H5 Series Hybrid Stepper Motor Stepper Motor 24V, 0.51Nm Torque, 1.8 °, 42 x 42 mm Frame, 5 mm Shaft
- RS PRO Hybrid Stepper Motor 4V, 0.288Nm Torque, 1.8 °, 56.4 x 56.4 mm Frame, 6.35 mm Shaft
- RS PRO Hybrid Stepper Motor 6.5V, 0.08Nm Torque, 1.8 °, 39.2 x 39.2 mm Frame, 5 mm Shaft