제조사부품번호

SKF 15 Tooth Taper Bush Sprocket, PHS 10B-1TBH15 12 B-2

RS 제품 번호:: 267-8822
제조사 부품 번호:: PHS 10B-1TBH15
제조업체:: SKF

SKF 15 Tooth Taper Bush Sprocket, PHS 10B-1TBH15 12 B-2

모든 Sprockets 열람하기

Subtotal (1 unit)*

₩22,800.00

재고있음

3 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩22,800.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 267-8822
제조사 부품 번호:: PHS 10B-1TBH15
제조업체:: SKF

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SKF
	Bore Diameter	22mm
	Product Type	Sprocket
	Number of Teeth	15
	Bore Type	Taper Bush
	Pitch Diameter	76.36mm
	Hub Diameter	60mm
	Material	High Grade Steel
	Sprocket Width	25mm
	Acceptable Chain Type	12 B-2
	Maximum Inside Diameter	32mm
	Standards/Approvals	BS, EN

	모두 선택
	브랜드 SKF
	Bore Diameter 22mm
	Product Type Sprocket
	Number of Teeth 15
	Bore Type Taper Bush
	Pitch Diameter 76.36mm
	Hub Diameter 60mm
	Material High Grade Steel
	Sprocket Width 25mm
	Acceptable Chain Type 12 B-2
	Maximum Inside Diameter 32mm
	Standards/Approvals BS, EN

Datasheet - PHS 10B-1TBH15

로그인하여 CAD 모델 다운로드

COO (Country of Origin):: CN

SKF Sprocket, 25mm Width, 15 Teeth - PHS 10B-1TBH15

This sprocket is a toothed wheel designed to transfer motion in chain-driven systems using a taper bush mounting. It is intended for industrial conveyor and machinery applications where precise chain engagement and dependable shaft attachment are required. Conformity with recognised standards ensures it is suitable for regulated installations.

Features and Benefits:

• Taper bore provides secure shaft clamping for stable operation
• 15 teeth ensure accurate indexing for repetitive motion
• Accepts 12B-2 chain for compatible power transmission
• Made from high grade steel for enhanced load carrying
• Standards-approved construction supports regulatory fit-outs

Applications

• Suitable for industrial conveyors requiring precise engagement
• Ideal for machinery needing tapered bushing attachment
• Used with 12B-2 chain in material handling systems
• Can be used for indexed drive mechanisms in plant

What mounting Interface does it use?

It employs a taper bush arrangement for a tight fit between hub and shaft.

What material properties affect wear resistance?

The component is manufactured from high grade steel which improves strength and durability under load.

Which chain type should be selected for compatibility?

A 12B-2 chain is compatible and recommended for correct meshing.

How does tooth count influence motion control?

Fifteen teeth deliver consistent pitch engagement for repeatable indexing.

What standards relate to manufacturing and acceptance?

Production conforms to BS and EN approvals indicating standardised specification compliance.