SKF 15 Tooth Simplex Taper Bush Sprocket, PHS 20B-1TBH15 16 B-1

모든 Sprockets 열람하기

Subtotal (1 unit)*

₩113,120.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 11월 02일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩113,120.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-9534
제조사 부품 번호:
PHS 20B-1TBH15
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Sprocket

Bore Diameter

63.5mm

Number of Teeth

15

Bore Type

Simplex Taper Bush

Pitch Diameter

152.71mm

Hub Diameter

108mm

Material

Steel

Sprocket Width

45mm

Maximum Inside Diameter

63.5mm

Acceptable Chain Type

16 B-1

Standards/Approvals

BS, EN

COO (Country of Origin):
CN

SKF Sprocket, 152.71mm Pitch Diameter - PHS 20B-1TBH15


This sprocket is a toothed drive component designed for chain transmission systems operating with 16 B-1 chain. It is constructed from steel and intended for installation using a simplex taper bush to provide a keyed connection between shaft and hub in industrial power transmission setups.

Features and Benefits:


• 15-tooth configuration delivers Compact torque multiplication
• 45 mm width supports sustained lateral chain engagement
• 152.71 mm pitch diameter ensures accurate chain pitch alignment
• 108 mm hub diameter provides robust support for mounted loads
• Tapered bore accommodates secure clamping on shaft tapers
• BS and EN approvals confirm conformity with recognised standards

Applications


• Suitable for conveyor drive stages using 16 B-1 chain
• Used with gearbox outputs requiring Compact sprockets
• Ideal for replacement sprocket needs in maintenance operations
• Can be used for light to medium industrial power transmission
• Suitable for retrofitting drives with taper bush mounting

What bore arrangement is provided for shaft attachment?


It uses a simplex taper bush arrangement that clamps onto a tapered shaft when tightened.

Which chain specification is compatible with this component?


It is designed to work specifically with 16 B-1 standard roller chain.

What internal clearance limits should be observed for shaft selection?


The maximum allowable inside diameter for the bore is 63.5 mm so shafts must be smaller than this value.

What material characteristics affect its operational durability?


The sprocket is MADE from steel, giving it high tensile capacity and wear resistance suitable for routine industrial loads.

관련된 링크들