Moflash LEDA125 Series Red Beacon-Buzzer Combination, IP65 280V ac Surface, Wall 90 dB @ 1m

RS 제품 번호:: 674-2012
제조사 부품 번호:: LEDA125-04-02
제조업체:: Moflash

Moflash LEDA125 Series Red Beacon-Buzzer Combination, IP65 280V ac Surface, Wall 90 dB @ 1m

Subtotal (1 unit)*

₩314,262.00

8 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩314,262.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 674-2012
제조사 부품 번호:: LEDA125-04-02
제조업체:: Moflash

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Moflash
	Product Type	Beacon-Buzzer Combination
	Lens Colour	Red
	Current Type	AC
	Light Effect	Flashing, Steady
	Sounder Type	Buzzer
	Mount Type	Surface, Wall
	Series	LEDA125
	Maximum Supply Voltage	280V ac
	Bulb Type	LED
	Housing Colour	Black
	Minimum Operating Temperature	-20°C
	Sound Level at 1m	90dB
	Maximum Operating Temperature	55°C
	Maximum Sound Level	90dB
	Number of Tones	1
	Hazardous Area Certification	No
	IP Rating	IP65
	Housing Material	ABS/Polycarbonate
	Standards/Approvals	CE Certified UKCA

	모두 선택
	브랜드 Moflash
	Product Type Beacon-Buzzer Combination
	Lens Colour Red
	Current Type AC
	Light Effect Flashing, Steady
	Sounder Type Buzzer
	Mount Type Surface, Wall
	Series LEDA125
	Maximum Supply Voltage 280V ac
	Bulb Type LED
	Housing Colour Black
	Minimum Operating Temperature -20°C
	Sound Level at 1m 90dB
	Maximum Operating Temperature 55°C
	Maximum Sound Level 90dB
	Number of Tones 1
	Hazardous Area Certification No
	IP Rating IP65
	Housing Material ABS/Polycarbonate
	Standards/Approvals CE Certified UKCA

COO (Country of Origin):: GB

Moflash Red Buzzer Beacon, 230V AC, 90dB - LEDA125 Series - LEDA125-04-02

Enhance safety in your workplace with this red buzzer beacon from Moflash. The LED (light-emitting diode) bulb rotates around the vertical axis to create a continuous flashing effect with a 360° reach for broad visibility. The buzzer emits an audible alert at the same time to provide an additional indicator of a hazard. It produces a volume of up to 90dB (decibels) at 1m, making it easy to hear at a distance. The base plate houses dual circuit boards for the buzzer and light that fit securely into the enclosure for protection against moisture and wear.

Features & Benefits

• Wide operating temperature range of -20°C to +55°C for use in extreme industrial environments

• Flame-retardant ABS (acrylonitrile butadiene styrene) housing material helps prevent the spread of flames in case of a fire

• Polycarbonate lens material is resistant to UV (ultraviolet) rays for outdoor use

• IP65 (ingress protection) rating means the unit can withstand exposure to low-pressure water jets and dust

Applications

• Factory assembly lines

• Fire safety

• Testing facilities

How fast does this light flash?

The light has three modes, so you can choose the most suitable mode for your application. There's a steady light, a standard flash at 60FPM (flashes per minute) and a rapid flash at 90FPM.

Compact LED Beacon / Buzzer Combination

The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

Two signals in one

100000 hours life for LED

Continuously rated

48 LED array ultra bright

360° visibility

Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)

3 point fixing

UV stable polycarbonate lens and ABS base

IP65 protection

RoHS compliant

CE marking

LED/Buzzer

Note

Piezos cannot be controlled independently from the light.