Weller XNT 4 1.2 mm Bevel 29.5 mm Soldering Iron Tip for use with WP65, WXP90, WTP90, WXP65
- RS 제품 번호:
- 752-7650
- Distrelec 제품 번호:
- 182-49-146
- 제조사 부품 번호:
- T0054485599
- 제조업체:
- Weller
Subtotal (1 unit)*
₩15,860.00
재고있음
- 166 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩15,860.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 752-7650
- Distrelec 제품 번호:
- 182-49-146
- 제조사 부품 번호:
- T0054485599
- 제조업체:
- Weller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller | |
| Tip Shape | Bevel | |
| Model Number | XNT 4 | |
| Product Type | Soldering Iron Tip | |
| For Use With | WP65, WXP90, WTP90, WXP65 | |
| Tip Series | XNT | |
| Tip Angle | 45° | |
| Tip Width | 1.2 mm | |
| Tip Length | 29.5mm | |
| Standards/Approvals | UPC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller | ||
Tip Shape Bevel | ||
Model Number XNT 4 | ||
Product Type Soldering Iron Tip | ||
For Use With WP65, WXP90, WTP90, WXP65 | ||
Tip Series XNT | ||
Tip Angle 45° | ||
Tip Width 1.2 mm | ||
Tip Length 29.5mm | ||
Standards/Approvals UPC | ||
- COO (Country of Origin):
- JP
Weller Soldering Iron Tip, 29.5mm Tip Length, 1.2mm Tip Width - T0054485599
This soldering iron tip is a bevel-shaped replacement element designed for precision soldering in professional workshop and assembly settings. It is intended to perform accurate thermal transfer on small joints and angled surfaces, compatible with a range of compatible soldering handles. The tip is UPC approved, meeting specified conformity for use in certified tools.
Features and Benefits:
• Bevel geometry delivers controlled wetting and solder flow
• 45° working angle enables access to angled joints
• 1.2mm working edge supports fine, repeatable solder beads
• 29.5mm overall length aids reach into confined areas
• Compatible with multiple handles for interchangeability
• 45° working angle enables access to angled joints
• 1.2mm working edge supports fine, repeatable solder beads
• 29.5mm overall length aids reach into confined areas
• Compatible with multiple handles for interchangeability
Applications
• Suitable for precision component soldering on small assemblies
• Ideal for angled joint rework and touch-up tasks
• Used with WP65 and WXP90 series handles
• Can be used for replacements in WTP90 and WXP65 tools
• Ideal for angled joint rework and touch-up tasks
• Used with WP65 and WXP90 series handles
• Can be used for replacements in WTP90 and WXP65 tools
Which handles will accept this bevel element?
It fits soldering handles designated WP65, WXP90, WTP90 and WXP65.
How does the bevel profile affect solder control?
The slanted face concentrates heat at the edge, improving solder flow and reducing bridging on fine pads.
Is the tip length suited to recessed connectors?
The 29.5mm length provides additional reach for accessing recessed or crowded connector areas without extended handle intrusion.
What approval indicates manufacturing conformity?
The product carries UPC approval confirming adherence to the applicable approval criteria.
Note
Weller recommends the use of Weller-branded solder wire (WSW) to achieve the best soldering performance and maximise the service life of your Weller soldering products.
관련된 링크들
- Weller XNT BB 2.4 mm Bevel 28 mm Soldering Iron Tip for use with WXP90, WP65, WTP90, WXP65
- Weller XNT CC 3.2 mm Bevel 28 mm Soldering Iron Tip for use with WXP65, WXP90, WTP90, WP65
- Weller XNT AA 1.6 mm Bevel 28 mm Soldering Iron Tip for use with WP65, WTP90, WXP65, WXP90
- Weller XNT AX 1,6 mm Bent Screwdriver Soldering Iron Tip for use with WXP65, WP65, WTP90, WXP90
- Weller XNT D 4 mm Screwdriver 28 mm Soldering Iron Tip for use with WXP65, WP65, WTP90, WXP90
- Weller XNT KN 2 mm Knife 33 mm Soldering Iron Tip for use with WP65, WTP90, WXP65, WXP90
- Weller XNT 1LX 0.2 mm Bent Conical Soldering Iron Tip for use with WXP90, WXP65, WP65, WTP90
- Weller XNT K 1.2 mm Screwdriver 28 mm Soldering Iron Tip for use with WP65, WTP90, WXP90, WXP65