Weller XNT A 1.6 mm Screwdriver 28 mm Soldering Iron Tip for use with WP65, WTP90, WXP65, WXP90
- RS 제품 번호:
- 752-7638
- Distrelec 제품 번호:
- 182-49-142
- 제조사 부품 번호:
- T0054485199
- 제조업체:
- Weller
Subtotal (1 unit)*
₩19,860.00
재고있음
- 806 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩19,860.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 752-7638
- Distrelec 제품 번호:
- 182-49-142
- 제조사 부품 번호:
- T0054485199
- 제조업체:
- Weller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller | |
| Tip Shape | Screwdriver | |
| Model Number | XNT A | |
| Product Type | Soldering Iron Tip | |
| For Use With | WP65, WTP90, WXP65, WXP90 | |
| Tip Series | XNT | |
| Tip Width | 1.6 mm | |
| Tip Length | 28mm | |
| Standards/Approvals | UPC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller | ||
Tip Shape Screwdriver | ||
Model Number XNT A | ||
Product Type Soldering Iron Tip | ||
For Use With WP65, WTP90, WXP65, WXP90 | ||
Tip Series XNT | ||
Tip Width 1.6 mm | ||
Tip Length 28mm | ||
Standards/Approvals UPC | ||
Weller Soldering Iron Tip, 28mm Tip Length, 1.6mm Tip Width - T0054485199
This soldering iron tip is a replacement contact designed for precision soldering tools and compatible stations. It fits selected Weller irons and is shaped for accurate solder transfer in tactical repair and assembly tasks. The tip meets UPC approval and is supplied as a screwdriver-profile implement for controlled heat delivery in fine work.
Features and Benefits:
• Screwdriver profile improves contact on flat and slotted joints
• Compatible with multiple handheld stations for flexible use
• 28mm length reaches recessed solder points reliably
• 1.6mm working width enables fine-detail soldering performance
• Robust construction supports repeated thermal cycling
• Compatible with multiple handheld stations for flexible use
• 28mm length reaches recessed solder points reliably
• 1.6mm working width enables fine-detail soldering performance
• Robust construction supports repeated thermal cycling
Applications
• Suitable for component-level board repairs
• Used with WP65-based stations for general soldering
• Ideal for maintenance of consumer electronics assemblies
• Used for precision wiring and connector tasks
• Suitable for WXP90-equipped benches during prototyping
• Used with WP65-based stations for general soldering
• Ideal for maintenance of consumer electronics assemblies
• Used for precision wiring and connector tasks
• Suitable for WXP90-equipped benches during prototyping
Which handsets is this tip designed to fit?
It accepts installation in selected Weller handheld models including WP65 and WXP65 variants, as well as higher-power WTP90 and WXP90 tools.
How does the shape affect thermal transfer during soldering?
The screwdriver geometry concentrates heat across a narrow edge for more efficient solder melting on flat surfaces while permitting controlled wettability.
What operational advantage does the 1.6mm width provide?
The narrow width offers enhanced access to small pads and closely spaced leads, reducing the risk of bridging adjacent contacts.
Are there considerations for replacing the tip during routine servicing?
Replace when wear alters the working face
ensure secure seating in the iron to maintain consistent thermal contact and repeatability.
Note
Weller recommends the use of Weller-branded solder wire (WSW) to achieve the best soldering performance and maximise the service life of your Weller soldering products.
관련된 링크들
- Weller XNT GW2 Mini-Wave Soldering Iron Tip for use with WXP65, WP65, WTP90, WXP90
- Weller XNT D 4 mm Screwdriver 28 mm Soldering Iron Tip for use with WXP65, WP65, WTP90, WXP90
- Weller XNT KN 2 mm Knife 33 mm Soldering Iron Tip for use with WP65, WTP90, WXP65, WXP90
- Weller XNT AX 1,6 mm Bent Screwdriver Soldering Iron Tip for use with WXP65, WP65, WTP90, WXP90
- Weller XNT B 2.4 mm Screwdriver 27 mm Soldering Iron Tip for use with WP65, WTP90, WXP90, WXP65
- Weller XNT C 3.2 mm Screwdriver 27 mm Soldering Iron Tip for use with WTP90, WXP65, WP65, WXP90
- Weller XNT BB 2.4 mm Bevel 28 mm Soldering Iron Tip for use with WXP90, WP65, WTP90, WXP65
- Weller XNT H 0.8 mm Chisel 28 mm Soldering Iron Tip for use with WXP65, WTP90, WP65, WXP90
