Weller XT M 3.2 mm Screwdriver 40 mm Soldering Iron Tip for use with WP120, WXP120
- RS 제품 번호:
- 512-847
- Distrelec 제품 번호:
- 182-97-622
- 제조사 부품 번호:
- T0054470299
- 제조업체:
- Weller
Subtotal (1 unit)*
₩19,100.00
재고있음
- 추가로 2026년 11월 23일 부터 156 개 단위 배송
- 추가로 2026년 11월 26일 부터 50 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩19,100.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 512-847
- Distrelec 제품 번호:
- 182-97-622
- 제조사 부품 번호:
- T0054470299
- 제조업체:
- Weller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller | |
| Model Number | XT M | |
| Tip Shape | Screwdriver | |
| Product Type | Soldering Iron Tip | |
| For Use With | WP120, WXP120 | |
| Tip Series | XT | |
| Tip Width | 3.2 mm | |
| Tip Length | 40mm | |
| Standards/Approvals | UPC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller | ||
Model Number XT M | ||
Tip Shape Screwdriver | ||
Product Type Soldering Iron Tip | ||
For Use With WP120, WXP120 | ||
Tip Series XT | ||
Tip Width 3.2 mm | ||
Tip Length 40mm | ||
Standards/Approvals UPC | ||
- COO (Country of Origin):
- BA
Weller Soldering Iron Tip, 40mm Tip Length, 3.2mm Tip Width - T0054470299
This soldering iron tip is a replacement accessory designed for use with compatible Weller soldering stations. It provides a precise screwdriver-shaped contact point for transferring heat to solder joints in electronic and electrical tasks. The tip is intended for technicians who require a specific geometry for soldering flat or slotted connections and works within established tool ecosystems.
Features and Benefits:
• Screwdriver-shaped contact for controlled solder flow and access
• UPC approval ensuring standardised manufacturing traceability
• Compatible with common handheld station connections for quick swaps
• Narrow 3.2mm width for precise contact on small pads
• 40mm length for extended reach into recessed areas
• UPC approval ensuring standardised manufacturing traceability
• Compatible with common handheld station connections for quick swaps
• Narrow 3.2mm width for precise contact on small pads
• 40mm length for extended reach into recessed areas
Applications
• Suitable for repair work on small-format electronics
• Ideal for desoldering flat component leads and tabs
• Used with WP120-style handles in bench environments
• Compatible replacement for WXP120 maintenance tasks
• Can be used for soldering on assemblies with tight clearance
• Ideal for desoldering flat component leads and tabs
• Used with WP120-style handles in bench environments
• Compatible replacement for WXP120 maintenance tasks
• Can be used for soldering on assemblies with tight clearance
Which tools will accept this tip mechanically?
It fits the insertion and retention system used by the WP120 and WXP120 handle types.
How does the shape influence soldering technique?
The screwdriver profile increases lateral contact area, aiding even heat distribution on slotted connections and reducing tip rocking.
Are there considerations for tip lifecycle during use?
Regular tinning after use and operating at appropriate temperatures will limit oxidation and maintain heat transfer efficiency.
What should be checked before installation?
Verify the handles mounting interface and ensure the tip seating is clean to prevent intermittent thermal contact.
Note
Weller recommends the use of Weller-branded solder wire to achieve the best soldering performance and maximise the service life of your Weller soldering products.
관련된 링크들
- Weller XT D 45 5 mm Screwdriver Soldering Iron Tip for use with WP120, WXP120
- Weller XT D 4.6 mm Screwdriver 35 mm Soldering Iron Tip for use with WP120, WXP120
- Weller XT E 5.9 mm Screwdriver 35 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT AX 30 1.6 mm Bent Screwdriver Soldering Iron Tip for use with WP120, WXP120
- Weller XT AL 1.6 mm Screwdriver 40 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT DL 4.6 mm Screwdriver 40 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT DS 5 mm Round 35 mm Soldering Iron Tip for use with WP120, WXP120
- Weller XT KN 2 mm Knife 45 mm Soldering Iron Tip for use with WXP120, WP120
