Igus Slewing Ring with 185 mm OD
- RS 제품 번호:
- 667-1298
- 제조사 부품 번호:
- PRT-01-100
- 제조업체:
- Igus
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩1,162,400.00
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,162,400.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 667-1298
- 제조사 부품 번호:
- PRT-01-100
- 제조업체:
- Igus
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Igus | |
| Product Type | Slewing Ring | |
| Seal Material | Aluminium | |
| Material | Aluminium | |
| 모두 선택 | ||
|---|---|---|
브랜드 Igus | ||
Product Type Slewing Ring | ||
Seal Material Aluminium | ||
Material Aluminium | ||
- COO (Country of Origin):
- DE
Igus Series W Linear Guide Rail, 40mm Rail Width, 600mm Rail Length - WS-10-40-600
This linear guide rail provides guided linear motion for industrial automation and mechanical assemblies. It is constructed from corrosion-resistant stainless steel combined with hard anodised aluminium to balance durability and reduced friction. The rail is intended for medium-to-long stroke installations where predictable, guided travel is required within electrical, electronics and mechanical systems.
Features and Benefits:
• 4800N static load rating delivers high load-bearing capacity
• 40mm rail width ensures stable lateral guidance
• Stainless steel construction resists corrosion in workshop environments
• Hard anodised aluminium profile reduces surface wear and friction
• 600mm length offers extended travel without joints
• W-series compatibility simplifies replacement and maintenance
• 40mm rail width ensures stable lateral guidance
• Stainless steel construction resists corrosion in workshop environments
• Hard anodised aluminium profile reduces surface wear and friction
• 600mm length offers extended travel without joints
• W-series compatibility simplifies replacement and maintenance
Applications
• Suitable for linear motion stages in automation rigs
• Ideal for mounting in electrical cabinet actuator systems
• Used with pick-and-place assemblies in electronics manufacturing
• Can be used for guided slides in mechanical test rigs
• Suitable for retrofitting as a replacement rail in maintenance
• Ideal for mounting in electrical cabinet actuator systems
• Used with pick-and-place assemblies in electronics manufacturing
• Can be used for guided slides in mechanical test rigs
• Suitable for retrofitting as a replacement rail in maintenance
What materials are used and how do they affect wear?
The running surface combines stainless steel and hard anodised aluminium, giving a balance of corrosion resistance and a hardened contact layer to reduce surface wear over repeated cycles.
How does the rail support heavy loads during static conditions?
The rail’s static capacity is 4800N, meaning it can support substantial stationary forces without permanent deformation when correctly mounted.
What guidance exists for integrating into longer travel systems?
At 600mm length, the rail provides uninterrupted travel suitable for applications requiring a single-piece guide
multiple rails can be aligned for extended strokes with appropriate mounting accuracy.
Which environments suit this rail’s materials?
The stainless steel component suits humid or workshop environments, while the anodised aluminium section provides additional surface hardness for industrial settings.
관련된 링크들
- Igus Slewing Ring with 100 mm OD
- Igus Slewing Ring with 150 mm OD
- Igus Slewing Ring with 160 mm OD
- Igus Slewing Ring with 80 mm OD
- IKO Nippon Thompson Slewing Ring with 100 mm OD
- IKO Nippon Thompson Slewing Ring with 70 mm OD
- IKO Nippon Thompson Slewing Ring with 80 mm OD
- IKO Nippon Thompson Slewing Ring with 55 mm OD