SKF Nitrile Rubber (NBR) Radial Shaft Seal, 65 mm ID, 120 mm OD, 12 mm

모든 Seals 열람하기

Subtotal (1 pack of 5 units)*

₩52,780.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
5 +₩10,556.00₩52,780.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3793
제조사 부품 번호:
65X120X12 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

65mm

Outside Diameter

120mm

Seal Type

Rotary Shaft Seal

Thickness

12mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 65mm Inside Diameter, 120mm Outside Diameter - 65X120X12 HMSA10 RG


This radial shaft seal provides a rotational sealing Interface designed to prevent fluid leakage and exclude contaminants in rotary assemblies. It is intended for installations where a resilient sealing lip and resistance to common hydrocarbon-based fluids are required, operating as a shaft-mounted seal between rotating and stationary components.

Features and Benefits:


• Nitrile rubber construction resists many oil-based fluids
• Rotary seal form reduces leakage at rotating interfaces
• 12mm cross-section offers robust axial sealing contact
• Designed for continuous shaft rotation under normal conditions
• Compatible with standard shaft bore installations requiring lip Seals

Applications


• Suitable for gearboxes requiring fluid retention at shafts
• Ideal for pump drives handling lubricated media
• Used with motor shafts in industrial drivetrains
• Can be used for rotary couplings in factory equipment
• Appropriate for refurbishment of rotating machine Seals

What material properties influence chemical resistance?


The elastomer is nitrile rubber which provides resistance to many hydrocarbon oils and greases.

How should shaft and housing tolerances be prepared for installation?


Machined bore and shaft surfaces should be concentric and smooth to ensure correct interference and sealing lip contact.

What physical role does the 12mm thickness perform during operation?


The 12mm cross-section maintains axial lip pressure and accommodates minor shaft misalignment while preserving sealing contact.

Which diameters must match mating components for correct fit?


The internal diameter must match the shaft diameter while the external diameter must correspond to the housing bore for proper seating.

How does the seal cope with particulate ingress at rotary interfaces?


The lip profile and resilient material act to exclude contaminants from the lubricated sealing zone during rotation.

관련된 링크들