SKF Nitrile Rubber (NBR) Radial Shaft Seal, 118 mm ID, 150 mm OD, 12 mm
- RS 제품 번호:
- 266-8842
- 제조사 부품 번호:
- 118X150X12 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 5 units)*
₩97,660.00
재고있음
- 추가로 2026년 10월 12일 부터 25 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 + | ₩19,532.00 | ₩97,660.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 266-8842
- 제조사 부품 번호:
- 118X150X12 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 118mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 150mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 12mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 118mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 150mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 12mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 12mm Thickness, 118mm Inside Diameter - 118X150X12 HMSA10 RG
This radial shaft seal provides a sealing solution for rotary shafts in industrial contexts, preventing fluid leakage and contamination around rotating interfaces. It is manufactured from nitrile rubber and is intended for use where a resilient elastomeric barrier is required between a shaft and housing.
Features and Benefits:
• Nitrile rubber compound resists common lubricants and oils
• Rotary design maintains contact during shaft rotation
• Robust cross-section offers consistent sealing pressure
• Suitable for elevated operating temperatures when NBR is specified
• Engineered to reduce ingress of dust and debris
• Rotary design maintains contact during shaft rotation
• Robust cross-section offers consistent sealing pressure
• Suitable for elevated operating temperatures when NBR is specified
• Engineered to reduce ingress of dust and debris
Applications
• Used with rotating drives in manufacturing equipment
• Suitable for Seals on gearbox housings and motors
• Ideal for replacing worn shaft Seals in maintenance work
• Can be used within hydraulic component assemblies
• Suitable for Seals on gearbox housings and motors
• Ideal for replacing worn shaft Seals in maintenance work
• Can be used within hydraulic component assemblies
What material properties affect chemical compatibility?
The seal uses a nitrile rubber elastomer which provides compatibility with mineral oils and many lubricants while offering resistance to common industrial fluids.
How is the seal retained around the shaft under rotation?
The lip geometry delivers continuous radial contact against the shaft to maintain the fluid barrier while accommodating shaft rotation.
What operational environments is the elastomer suitable for?
The NBR composition performs well in general industrial temperature ranges and resists degradation from oil exposure.
How should the component be chosen for replacement tasks?
Select a seal with matching internal and external dimensions and the same elastomer type to ensure correct fit and material behaviour.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 118 mm ID, 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 125 mm ID, 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 110 mm ID, 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 85 mm ID, 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 150 mm ID, 170 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 115 mm ID, 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 120 mm ID, 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 100 mm ID, 150 mm OD, 12 mm