SKF Nitrile Rubber (NBR) Radial Shaft Seal, 35 mm ID, 55 mm OD, 10 mm
- RS 제품 번호:
- 267-3480
- 제조사 부품 번호:
- 35X55X10 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩38,820.00
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩3,882.00 | ₩38,820.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3480
- 제조사 부품 번호:
- 35X55X10 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 35mm | |
| Outside Diameter | 55mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 35mm | ||
Outside Diameter 55mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 35mm Inside Diameter, 55mm Outside Diameter - 35X55X10 HMS5 RG
This radial shaft seal provides a sealing solution for rotary shafts, designed to retain lubricants and exclude contaminants in rotating assemblies. It is constructed from nitrile rubber and is intended for installations where a resilient lip material is required to maintain contact with a rotating journal while preventing fluid leakage and particle ingress.
Features and Benefits:
• Nitrile rubber construction offers resistance to oils and greases
• Rotary shaft design maintains continuous dynamic sealing contact
• 10 mm section thickness resists extrusion under axial load
• Robust lip profile reduces fluid migration along the shaft
• Compatible with typical rotating shaft speeds in industrial equipment
• Rotary shaft design maintains continuous dynamic sealing contact
• 10 mm section thickness resists extrusion under axial load
• Robust lip profile reduces fluid migration along the shaft
• Compatible with typical rotating shaft speeds in industrial equipment
Applications
• Suitable for hydraulic motor and pump rotating interfaces
• Ideal for gearbox output shaft sealing tasks
• Used with electric motor shaft sealing arrangements
• Can be used for agricultural machinery driveline Seals
• Appropriate for general industrial rotating equipment maintenance
• Ideal for gearbox output shaft sealing tasks
• Used with electric motor shaft sealing arrangements
• Can be used for agricultural machinery driveline Seals
• Appropriate for general industrial rotating equipment maintenance
What material behaviour can I expect against mineral oils?
The NBR elastomer exhibits resistance to a range of mineral oils, maintaining sealing elasticity under typical operating conditions.
How should shaft and bore tolerances be considered for installation?
Ensure shaft and housing tolerances allow correct radial compression of the lip without excessive interference to preserve material life.
What operating condition affects seal longevity most?
Continuous shaft abrasion and high shaft run‑out increase lip wear and reduce service life.
Can the component handle both static and dynamic sealing roles?
The seal functions in dynamic sealing on rotating shafts and can also provide a static barrier when fitted within a housing bore.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 55 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 55 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 70 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 90 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 78 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 80 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 85 mm OD, 10 mm