SKF Nitrile Rubber (NBR) Radial Shaft Seal, 35 mm ID, 72 mm OD, 10 mm

This radial shaft seal is designed to prevent fluid leakage and exclude contaminants from rotary assemblies in mechanical systems. Constructed from nitrile rubber, it is suitable for dynamic sealing of rotating shafts where resilient contact and resistance to common lubricants are required. The seal serves as a barrier between shaft interfaces and external environments in applications involving continuous rotation.

• Nitrile rubber composition offers resistance to oils and fuels
• Rotary shaft configuration maintains consistent lip contact
• Robust radial sealing reduces ingress of dust and debris
• Suitable for repetitive rotational cycles without Rapid degradation
• Formulated elastomer provides effective sealing under moderate temperatures

• Suitable for motors requiring NBR radial shaft Seals
• Used with bearing housings as a rotary seal for bearings 35x72
• Ideal for gearboxes needing an oil seal for rotating shafts 35 mm ID
• Can be used in pumps requiring a 72 mm outer diameter oil seal
• Suitable for industrial drives specifying radial shaft seal 35x72x10 mm

The seal is MADE from nitrile rubber which provides compatibility with common lubricants.

It is designed as a rotary shaft seal to operate on rotating shafts.

It fits shafts with a 35 mm inside diameter and housings for a 72 mm outside diameter.

The seal has a thickness of 10 mm which provides the axial cross-section for lip contact.