SKF Nitrile Rubber (NBR) Radial Shaft Seal, 35 mm ID, 55 mm OD, 10 mm
- RS 제품 번호:
- 267-3481
- 제조사 부품 번호:
- 35X55X10 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩38,820.00
재고있음
- 30 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩3,882.00 | ₩38,820.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3481
- 제조사 부품 번호:
- 35X55X10 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 35mm | |
| Outside Diameter | 55mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 35mm | ||
Outside Diameter 55mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 35mm Inside Diameter, 55mm Outside Diameter - 35X55X10 HMSA10 RG
This radial shaft seal provides a rotational sealing solution for shafts, designed to prevent fluid leakage and exclude contaminants in rotary applications. It is MADE from nitrile rubber and is intended for use where a resilient contact lip and material compatibility are required for dynamic sealing duties.
Features and Benefits:
• Nitrile rubber construction resists common oils and greases
• Rotary design maintains contact under shaft rotation
• Durable 10 mm section thickness supports axial stability
• 35 mm internal fit minimises lateral movement on shafts
• 55 mm external fit secures housing bore clearance
• Rotary design maintains contact under shaft rotation
• Durable 10 mm section thickness supports axial stability
• 35 mm internal fit minimises lateral movement on shafts
• 55 mm external fit secures housing bore clearance
Applications
• Suitable for sealing rotating shafts in bearings
• Used with gearboxes requiring oil retention
• Ideal for motors with dynamic shaft movement
• Can be used for pump shaft sealing duties
• Used for industrial rotary assemblies needing contamination exclusion
• Used with gearboxes requiring oil retention
• Ideal for motors with dynamic shaft movement
• Can be used for pump shaft sealing duties
• Used for industrial rotary assemblies needing contamination exclusion
What material characteristics affect chemical compatibility?
The seal is formed from nitrile rubber which offers good resistance to many mineral oils and greases while providing elastic recovery for repeated shaft movement.
How should the component be matched to a shaft and bore?
Select mating shaft and housing bores sized to the internal and external diameters so the lip achieves an interference fit for reliable lip contact and the outer surface seats in the bore.
What assembly considerations ensure correct performance?
Ensure the sealing lip faces the fluid to be retained, avoid nicking the lip during installation, and verify concentric alignment to reduce uneven wear.
How does thickness influence installation and function?
The 10 mm section thickness provides axial rigidity that helps maintain lip pressure and resist extrusion in moderate clearance applications.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 55 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 55 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 78 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 75 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 70 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 90 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 55 mm OD, 10 mm