SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 80 mm OD, 8 mm
- RS 제품 번호:
- 267-0329
- 제조사 부품 번호:
- 50X80X8 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩42,380.00
재고있음
- 추가로 2026년 7월 13일 부터 40 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩4,238.00 | ₩42,388.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0329
- 제조사 부품 번호:
- 50X80X8 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Inside Diameter | 50mm | |
| Outside Diameter | 80mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Inside Diameter 50mm | ||
Outside Diameter 80mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 50mm Inside Diameter, 80mm Outside Diameter - 50X80X8 HMS5 RG
This seal is a radial rotary shaft seal designed to retain oil or grease between moving and stationary components. It features a rubber outside diameter and a single elastomeric sealing lip with a garter spring to maintain contact, making it suitable for shafts requiring dynamic sealing under rotary motion.
Features & Benefits
• Nitrile rubber lip offers chemical resistance and wear protection
• Garter spring maintains consistent radial load for reliable sealing
• Rubber outside diameter ensures secure press-fit in bore
• Permits circumferential speeds up to 7.8 m/s for moderate-speed shafts
• Operates across −40°C to 100°C continuous temperature range
• Withstands short-term temperature peaks to 120°C for transient events
• Garter spring maintains consistent radial load for reliable sealing
• Rubber outside diameter ensures secure press-fit in bore
• Permits circumferential speeds up to 7.8 m/s for moderate-speed shafts
• Operates across −40°C to 100°C continuous temperature range
• Withstands short-term temperature peaks to 120°C for transient events
**Applications**
• Suitable for sealing rotating shafts in automation actuators
• Ideal for gearboxes requiring oil containment under rotation
• Used with electric motor shafts in industrial drives
• Can be used for rotating assemblies in mechanical transmission systems
• Ideal for gearboxes requiring oil containment under rotation
• Used with electric motor shafts in industrial drives
• Can be used for rotating assemblies in mechanical transmission systems
What shaft and housing sizes does it correspond to?
It matches a 50 mm shaft diameter and fits an 80mm housing bore, with a seal width of 8mm.
How does it cope with slight misalignment between components?
The design accommodates minor shaft-to-housing misalignment while maintaining sealing contact thanks to the elastomeric lip and spring preload.
What rotational speed limits should be observed?
Maximum recommended rotational speed is 3,000 r/min to remain within the specified circumferential speed.
Is it suitable for light pressure differentials?
It is designed for low differential loads and is rated for a pressure differential of around 0.03 N/mm.
Are there related replacement accessories to consider during installation?
A thin-walled sleeve product is commonly used to repair worn housings or shafts before fitting the seal.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 80 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 58 mm ID, 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 65 mm ID, 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 50 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 32 mm ID, 50 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 72 mm OD, 8 mm