SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 68 mm OD, 8 mm
- RS 제품 번호:
- 267-0313
- 제조사 부품 번호:
- 50X68X8 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩34,761.20
재고있음
- 추가로 2026년 3월 23일 부터 50 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩3,476.12 | ₩34,757.44 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0313
- 제조사 부품 번호:
- 50X68X8 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 50mm Inside Diameter, 68mm Outside Diameter - 50X68X8 HMS5 RG
This radial shaft seal is designed to separate rotating and stationary components, retaining lubricants and excluding contaminants in mechanical systems. It features a rubber outer diameter and a single elastomer sealing lip with a garter spring to maintain contact, suitable for oil or grease service within common industrial assemblies.
Features & Benefits
• Garter spring ensures consistent radial load during operation
• Permissible circumferential speed 7.84 m/s supports moderate shaft speeds
• Operating range −40°C to 100°C allows varied thermal conditions
• Short-term temperature tolerance up to 120°C manages transient heat
• Accepts shaft misalignment to reduce leakage risk under slight offset
• Permissible circumferential speed 7.84 m/s supports moderate shaft speeds
• Operating range −40°C to 100°C allows varied thermal conditions
• Short-term temperature tolerance up to 120°C manages transient heat
• Accepts shaft misalignment to reduce leakage risk under slight offset
Applications
• Suitable for rotating shafts in automation gearboxes
• Ideal for motor and pump Seals in electrical equipment
• Used with bearings in mechanical transmission assemblies
• Can be used for oil seal replacement in industrial drives
• Suitable for rotating components in electronic cooling systems
• Ideal for motor and pump Seals in electrical equipment
• Used with bearings in mechanical transmission assemblies
• Can be used for oil seal replacement in industrial drives
• Suitable for rotating components in electronic cooling systems
What materials compose the sealing lip and outer surface?
The sealing lip is MADE from nitrile rubber (NBR) and the outside diameter is rubber reinforced with metal to aid installation in bores.
What rotational speeds can it withstand?
It is rated for a maximum rotational speed of 3000 r/min corresponding to a circumferential speed limit of 7.84 m/s.
How does it behave under pressure differentials?
The seal is designed for low pressure differentials, with a rated pressure differential of 0.03 N/mm across the lip.
Which measurement system and dimensions apply?
The product uses metric sizing with a 50mm shaft bore, 68mm housing outer diameter and an 8mm seal width.
Are there recommended associated components for installation?
A thin sleeve can be used on worn shafts
a compatible speedi-sleeve is listed for refurbishment tasks.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 68 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 52 mm ID, 68 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 68 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 40 mm ID, 68 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 40 mm ID, 50 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 50 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 32 mm ID, 50 mm OD, 8 mm