SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 80 mm OD, 8 mm

This radial shaft seal is designed to separate rotating and stationary components, preventing oil or grease leakage in machinery. It features an elastomeric sealing lip with a spring to maintain contact and a rubber outside diameter for press-fit into housings, making it suitable for rotating assemblies in industrial equipment.

• Nitrile lip resists oil and grease exposure
• Garter spring preserves radial sealing force during rotation
• Accommodates shaft misalignment to reduce wear
• Permissible circumferential speed 8.58 m/s for dynamic usage

• Suitable for bearing housings in automation equipment
• Ideal for gearboxes requiring oil containment
• Used with rotating shafts in electrical drive systems
• Can be used for maintenance of industrial motors and pumps

The seal is rated to a maximum rotational speed of 2760 r/min

The rubber outer diameter with metal reinforcement provides a secure press-fit in the housing bore while allowing some compliance for easier assembly.

Short-term exposure up to 120°C is permitted, above the continuous 100°C operating maximum, for transient thermal events.

A compatible speedi-sleeve is specified for repair of damaged or worn shaft surfaces before seal installation.