SKF Nitrile Rubber (NBR) Radial Shaft Seal, 15 mm ID, 40 mm OD, 7 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩26,620.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 60 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩2,662.00₩26,620.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-8954
제조사 부품 번호:
15X40X7 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

15mm

Outside Diameter

40mm

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 15mm Inside Diameter, 7mm Thickness - 15X40X7 HMSA10 RG


This radial shaft seal is a rotary sealing component designed to prevent fluid leakage and exclude contaminants where a rotating shaft passes through a housing. It is constructed from nitrile rubber and intended for use in rotary assemblies requiring a flexible lip seal to maintain lubricant retention and barrier integrity under typical operating conditions.

Features and Benefits:


• Nitrile rubber material resists common oils and greases
• Rotary lip design reduces shaft wear during operation
• Thin profile assists Compact assembly integration
• Robust sealing action maintains lubricant containment
• Consistent radial contact supports rotational stability

Applications


• Suitable for small electric motor sealing tasks
• Used with gearbox output shafts in Compact equipment
• Ideal for pumps where oil retention is required
• Can be used for automotive auxiliaries with rotary shafts
• Suitable for general industrial rotary shaft sealing needs

What material compatibility should I expect with common lubricants?


The seal is MADE from nitrile rubber which is compatible with many mineral oils and greases typically used in rotary systems.

How does the seal accommodate shaft movement during rotation?


The rotary lip design maintains continuous contact with the shaft, permitting rotation while limiting axial and radial leakage.

What installation considerations are relevant for press-fitting the seal?


Ensure a concentric bore and avoid angled seating to preserve the sealing lip profile and prevent premature wear.

How does the seal perform in Compact assemblies with limited axial space?


Its relatively thin cross-section allows integration into confined housings without significant alteration to surrounding components.

관련된 링크들