SKF Nitrile Rubber (NBR) Radial Shaft Seal, 40 mm ID, 60 mm OD, 10 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩33,420.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩3,342.00₩33,420.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-9137
제조사 부품 번호:
40X60X10 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

40mm

Outside Diameter

60mm

Seal Type

Rotary Shaft Seal

Thickness

10mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 40mm Inside Diameter, 60mm Outside Diameter - 40X60X10 HMSA10 RG


This radial shaft seal provides a sealing solution for rotating shafts in industrial equipment, preventing fluid leakage and contamination during operation. It is constructed from nitrile rubber and designed for rotary shaft applications where robust contact sealing is required.

Features and Benefits:


• Nitrile rubber construction resists common industrial oils
• Rotary design maintains dynamic sealing under rotation
• 10mm cross-section offers consistent contact pressure
• Designed for 40mm inner bore tolerance control
• Outside dimension suited to 60mm housing bores

Applications


• Suitable for bearings with 40mm shaft diameters
• Used with gearbox assemblies requiring oil retention
• Ideal for pump shafts operating with mineral oils
• Can be used for motorised rotary couplings
• Used for industrial drivetrain sealing tasks

What material compatibility should I expect with common lubricants?


The elastomeric compound performs with typical mineral oils and greases used in industrial environments.

How should the component be installed to avoid deformation?


Use a straight, non-tapered press fit on the bore and apply even axial force to avoid lip distortion.

What housing fit must be ensured for correct function?


The surrounding bore should closely match the stated outside dimension to provide radial support for the sealing lip.

How does shaft runout affect sealing performance?


Excessive shaft eccentricity will increase lip wear and accelerate leakage, maintain shaft concentricity within usual rotary equipment tolerances.

What operational factor influences seal life most directly?


Continuous shaft speed and surface finish affect wear rate of the elastomer sealing face.

관련된 링크들