SKF Nitrile Rubber (NBR) Radial Shaft Seal, 240 mm ID, 270 mm OD, 15 mm

모든 Seals 열람하기

Subtotal (1 unit)*

₩96,740.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 11월 09일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩96,740.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3690
제조사 부품 번호:
240X270X15 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

240mm

Outside Diameter

270mm

Seal Type

Rotary Shaft Seal

Thickness

15mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 240mm Inside Diameter, 270mm Outside Diameter - 240X270X15 HMSA10 RG


This radial shaft seal is a rotary sealing component designed to prevent fluid leakage and exclude contaminants where a rotating shaft passes through a housing. It is MADE from nitrile rubber and intended for use in machinery requiring a resilient lip seal to maintain lubrication and protect internal assemblies during rotation.

Features and Benefits:


• Nitrile rubber compound provides resistance to oils and fuels
• Rotary seal design reduces leakage under continuous rotation
• Robust 15 mm wall thickness improves sealing contact stability
• Engineered lip geometry maintains consistent shaft contact
• Suits moderate temperature elastomer performance requirements

Applications


• Suitable for sealing rotating shafts in gearboxes
• Ideal for use in pump and compressor assemblies
• Used with industrial drive shafts requiring oil retention
• Can be used for shaft penetrations on agricultural machinery
• Appropriate for refurbishment where elastomer replacement is needed

What elastomer characteristics influence chemical compatibility?


The NBR material offers resistance to mineral oils and common fuels while remaining flexible for dynamic sealing tasks.

How does the seal cope with shaft misalignment or runout?


The flexible sealing lip and 15 mm cross-section permit limited accommodation of eccentricity while preserving contact pressure.

What installation Interface dimensions must the housing provide?


The housing must accept a seal with an internal diameter of 240 mm and an external diameter of 270 mm to ensure correct seating.

How is leakage controlled during continuous operation?


A precision lip profile combined with the NBR compound maintains a fluid-tight barrier on rotating shafts under sustained service.

What maintenance considerations apply to this material and design?


Periodic inspection for hardening or abrasion of the elastomer is advised, and replacement intervals depend on operating fluids and rotational speed.

관련된 링크들