제조사부품번호

Wieland SNO 4083, 115V ac, 230 V ac Safety Relay, 3 Safety Contacts

RS 제품 번호:: 780-5082
제조사 부품 번호:: R1.188.3590.0
제조업체:: Wieland

Wieland SNO 4083, 115V ac, 230 V ac Safety Relay, 3 Safety Contacts

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩731,718.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩731,718.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 780-5082
제조사 부품 번호:: R1.188.3590.0
제조업체:: Wieland

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Wieland
	Product Type	Safety Relay
	Safety Contacts	3
	Reset Method	Manual
	Mount Type	DIN Rail
	Series	SNO 4083
	Power Consumption	4VA
	Terminal Type	Screw
	Time Delay	1.5 s
	IP Rating	IP20, IP40
	Minimum Operating Temperature	-25°C
	Contact Current	6A
	Switching DC Voltage	24V dc
	Switching AC Voltage	230V ac
	Standards/Approvals	EN 50156-1, EN 62061, EN 81-1, EN ISO 13849-1
	Maximum Operating Temperature	65°C
	Width	22.5mm
	Length	96.5mm
	Height	114mm
	Safety Category	CAT 4, ISO 13849-1
	Hazardous Area Certification	No
	Coil Voltage	115, 230V ac

	모두 선택
	브랜드 Wieland
	Product Type Safety Relay
	Safety Contacts 3
	Reset Method Manual
	Mount Type DIN Rail
	Series SNO 4083
	Power Consumption 4VA
	Terminal Type Screw
	Time Delay 1.5 s
	IP Rating IP20, IP40
	Minimum Operating Temperature -25°C
	Contact Current 6A
	Switching DC Voltage 24V dc
	Switching AC Voltage 230V ac
	Standards/Approvals EN 50156-1, EN 62061, EN 81-1, EN ISO 13849-1
	Maximum Operating Temperature 65°C
	Width 22.5mm
	Length 96.5mm
	Height 114mm
	Safety Category CAT 4, ISO 13849-1
	Hazardous Area Certification No
	Coil Voltage 115, 230V ac

SafeRELAY Datasheet

Wieland SNO 4083KM Safety Relay

SNO 4083KM Safety Relay Function - after the supply voltage is applied to terminals A1/A2 and the safety inputs are closed, the enabling current paths (NO contacts) are closed and the signal current path (NC contact) is opened automatically or by pressing the reset button (manual monitored start). When the safety inputs are opened/de-energized the enabling current paths (NO contacts) are opened immediately and the signal current path (NC contact) is closed.

The SNO 4083KM safety relay requires fewer connection cables, irrespective of whether operation with or without cross monitoring is desired. The two channel control of the SNO 4083KM is carried out by either an NC/NC or an NC/NO combination of the safety sensor. In the case of two channel control of the device, a synchronous time is automatically monitored between the two channels. The SafeStart function is used with a manual start, the reset input is automatically monitored for a rising and falling signal edge. The Monoflop function is integrated into the safety relay and prevents device interlocking under all circumstances. Simple diagnosis is possible thanks to an intelligent display system that shows the user the different operating modes of the safety relay in its different applications.

Monitoring of E-Stop, Safety Gate and Light Barrier applications

Stop Category 0 according to EN 60204-1

Single channel or two channel control

Two-channel control with NC/NC or NC/NO

Manual or automatic start

Cross monitoring

Synchronous time monitoring for two channel control

3 enabling current path / 1 signalling current path

Screw terminals, pluggable

Up to PL e / Category 4 (EN ISO 13849-1)

Up to SIL_CL 3 (EN 62061)

Wieland SNO 4083, 115V ac, 230 V ac Safety Relay, 3 Safety Contacts

Wieland SNO 4083KM Safety Relay

관련된 링크들