Wieland SNO 4083, 24V dc Safety Relay, 3 Safety Contacts, 1

RS 제품 번호:: 780-5073
제조사 부품 번호:: R1.188.3580.0
제조업체:: Wieland

Wieland SNO 4083, 24V dc Safety Relay, 3 Safety Contacts, 1

Subtotal (1 unit)*

₩540,040.00

11 개 단위 배송 준비 완료
추가로 2026년 11월 26일 부터 10 개 단위 배송
추가로 2027년 1월 21일 부터 7 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩540,040.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 780-5073
제조사 부품 번호:: R1.188.3580.0
제조업체:: Wieland

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Wieland
	Product Type	Safety Relay
	Safety Contacts	3
	Contact Configuration	NOC
	Number of Auxiliary Contacts	1
	Mount Type	DIN Rail
	Reset Method	Manual
	Power Consumption	1.6W
	Series	SNO 4083
	Terminal Type	Screw
	Time Delay	1.5 s
	IP Rating	IP40
	Switching DC Voltage	24V dc
	Standards/Approvals	EN 50156-1, EN ISO 13849-1, EN 62061, EN 81-1
	Switching AC Voltage	230V ac
	Minimum Operating Temperature	-25°C
	Contact Current	6A
	Maximum Operating Temperature	65°C
	Length	96.5mm
	Width	22.5mm
	Height	114mm
	Hazardous Area Certification	No
	Safety Category	4
	Coil Voltage	24V dc

	모두 선택
	브랜드 Wieland
	Product Type Safety Relay
	Safety Contacts 3
	Contact Configuration NOC
	Number of Auxiliary Contacts 1
	Mount Type DIN Rail
	Reset Method Manual
	Power Consumption 1.6W
	Series SNO 4083
	Terminal Type Screw
	Time Delay 1.5 s
	IP Rating IP40
	Switching DC Voltage 24V dc
	Standards/Approvals EN 50156-1, EN ISO 13849-1, EN 62061, EN 81-1
	Switching AC Voltage 230V ac
	Minimum Operating Temperature -25°C
	Contact Current 6A
	Maximum Operating Temperature 65°C
	Length 96.5mm
	Width 22.5mm
	Height 114mm
	Hazardous Area Certification No
	Safety Category 4
	Coil Voltage 24V dc

SafeRELAY Datasheet

COO (Country of Origin):: DE

Wieland SNO 4083KM Safety Relay

SNO 4083KM Safety Relay Function - after the supply voltage is applied to terminals A1/A2 and the safety inputs are closed, the enabling current paths (NO contacts) are closed and the signal current path (NC contact) is opened automatically or by pressing the reset button (manual monitored start). When the safety inputs are opened/de-energized the enabling current paths (NO contacts) are opened immediately and the signal current path (NC contact) is closed.

The SNO 4083KM safety relay requires fewer connection cables, irrespective of whether operation with or without cross monitoring is desired. The two channel control of the SNO 4083KM is carried out by either an NC/NC or an NC/NO combination of the safety sensor. In the case of two channel control of the device, a synchronous time is automatically monitored between the two channels. The SafeStart function is used with a manual start, the reset input is automatically monitored for a rising and falling signal edge. The Monoflop function is integrated into the safety relay and prevents device interlocking under all circumstances. Simple diagnosis is possible thanks to an intelligent display system that shows the user the different operating modes of the safety relay in its different applications.

Monitoring of E-Stop, Safety Gate and Light Barrier applications

Stop Category 0 according to EN 60204-1

Single channel or two channel control

Two-channel control with NC/NC or NC/NO

Manual or automatic start

Cross monitoring

Synchronous time monitoring for two channel control

3 enabling current path / 1 signalling current path

Screw terminals, pluggable

Up to PL e / Category 4 (EN ISO 13849-1)

Up to SIL_CL 3 (EN 62061)

Wieland SNO 4083, 24V dc Safety Relay, 3 Safety Contacts, 1

Wieland SNO 4083KM Safety Relay

관련된 링크들