Pilz P2HZ X3, 24V dc Safety Relay, 2 Safety Contacts, 1

RS 제품 번호:: 362-0174
Distrelec 제품 번호:: 300-77-750
제조사 부품 번호:: 774350
제조업체:: Pilz

Pilz P2HZ X3, 24V dc Safety Relay, 2 Safety Contacts, 1

Subtotal (1 unit)*

₩928,960.00

추가로 2026년 9월 14일 부터 2 개 단위 배송
추가로 2026년 9월 28일 부터 5 개 단위 배송
추가로 2026년 10월 26일 부터 3 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩928,960.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 362-0174
Distrelec 제품 번호:: 300-77-750
제조사 부품 번호:: 774350
제조업체:: Pilz

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Pilz
	Product Type	Safety Relay
	Safety Contacts	2
	Contact Configuration	2 NO/1 NC
	Number of Auxiliary Contacts	1
	Mount Type	DIN Rail
	Reset Method	Monitored
	Power Consumption	2.5W
	Series	P2HZ X3
	Terminal Type	Screw
	IP Rating	IP54
	Time Delay	15 ms
	Contact Current	5A
	Switching AC Voltage	240V ac
	Standards/Approvals	EN 60068-2-6, EN 60947-4-1, EN 60947-1, EN ISO 13849-1, EN 61000-6-2, EN 574 Type IIIC, EN 60068-2-78, EN 60204-1, EN 60947-5-1
	Switching DC Voltage	24V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	55°C
	Height	121mm
	Length	87mm
	Width	22.5mm
	Safety Category	CAT 4
	Hazardous Area Certification	No
	Coil Voltage	24V dc

	모두 선택
	브랜드 Pilz
	Product Type Safety Relay
	Safety Contacts 2
	Contact Configuration 2 NO/1 NC
	Number of Auxiliary Contacts 1
	Mount Type DIN Rail
	Reset Method Monitored
	Power Consumption 2.5W
	Series P2HZ X3
	Terminal Type Screw
	IP Rating IP54
	Time Delay 15 ms
	Contact Current 5A
	Switching AC Voltage 240V ac
	Standards/Approvals EN 60068-2-6, EN 60947-4-1, EN 60947-1, EN ISO 13849-1, EN 61000-6-2, EN 574 Type IIIC, EN 60068-2-78, EN 60204-1, EN 60947-5-1
	Switching DC Voltage 24V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 55°C
	Height 121mm
	Length 87mm
	Width 22.5mm
	Safety Category CAT 4
	Hazardous Area Certification No
	Coil Voltage 24V dc

COO (Country of Origin):: DE

PILZ P2HZ X3 Safety Relay

The PILZ P2HZ X3 range is an affordable, durable and reliable safety relay designed with two handed control units in mind. Useful when you need to control your press controllers and safety circuits.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.

• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage

• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

• Suitable for DIN rail mounting

• Durable and has an extended service life vs. competitors

• Positive guided relay outputs (2 safety contacts, 1 auxiliary)

Safety features

• The relay will provide the circuit self-monitoring.

• The safety functions of the device remain in effect even in the case of component failures.

• The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)

Technical safety parameters

• EN 60204-1

• EN 954-1

• EN (IEC) 62061

• EN ISO 13849-1

• IEC 61511 – SIL 3

Standards

EN 60204-1