제조사부품번호

Pilz P2HZ X1, 24V dc Safety Relay, 3 Safety Contacts, 1

RS 제품 번호:: 239-1083
Distrelec 제품 번호:: 304-10-469
제조사 부품 번호:: 774340
제조업체:: Pilz

Pilz P2HZ X1, 24V dc Safety Relay, 3 Safety Contacts, 1

Subtotal (1 unit)*

₩1,123,336.50

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩1,123,336.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 239-1083
Distrelec 제품 번호:: 304-10-469
제조사 부품 번호:: 774340
제조업체:: Pilz

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Pilz
	Product Type	Safety Relay
	Safety Contacts	3
	Contact Configuration	3 NO/1 NC
	Number of Auxiliary Contacts	1
	Reset Method	Monitored
	Mount Type	DIN Rail
	Series	P2HZ X1
	Power Consumption	6VA
	Terminal Type	Screw
	IP Rating	IP40, IP20, IP54
	Switching AC Voltage	240V ac
	Switching DC Voltage	24V dc
	Standards/Approvals	EN 60068-2-6, EN 60068-2-78, EN ISO 13849-1, EN 60947-1, EN 60947-4-1, EN 574 Type IIIC, EN 60204-1, EN IEC 62061, EN 60947-5-1, EN 61000-6-2, IEC 61511
	Contact Current	5A
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	55°C
	Height	121mm
	Length	87mm
	Width	45mm
	Hazardous Area Certification	No
	Safety Category	CAT 4
	Coil Voltage	24V dc

	모두 선택
	브랜드 Pilz
	Product Type Safety Relay
	Safety Contacts 3
	Contact Configuration 3 NO/1 NC
	Number of Auxiliary Contacts 1
	Reset Method Monitored
	Mount Type DIN Rail
	Series P2HZ X1
	Power Consumption 6VA
	Terminal Type Screw
	IP Rating IP40, IP20, IP54
	Switching AC Voltage 240V ac
	Switching DC Voltage 24V dc
	Standards/Approvals EN 60068-2-6, EN 60068-2-78, EN ISO 13849-1, EN 60947-1, EN 60947-4-1, EN 574 Type IIIC, EN 60204-1, EN IEC 62061, EN 60947-5-1, EN 61000-6-2, IEC 61511
	Contact Current 5A
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 55°C
	Height 121mm
	Length 87mm
	Width 45mm
	Hazardous Area Certification No
	Safety Category CAT 4
	Coil Voltage 24V dc

PILZ P2HZ X1, Two Hand Monitoring, Type IIIC

The P2HZ X1 series of Safety Relays by PILZ offer you affordable and reliable feedback control loops, specifically designed to handle the monitoring of your external relays or contactors.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.

• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage

• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

• Reactivation: The outputs will no re-energise unless both operator elements have been released and then re-operated simultaneously.

• Suitable for DIN rail mounting

• Durable and has an extended service life vs. competitors

Safety features

• The relay will provide the circuit self-monitoring.

• The safety functions of the device remain in effect even in the case of component failures.

• The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)

Technical safety parameters

• EN 60204-1

• EN 954-1

• EN (IEC) 62061

• EN ISO 13849-1

• IEC 61511 – SIL 3

Standards

EN574 (type III C)