SICK RE27 Safety Switch, Vistal, Magnet

This safety switch is a non-contact interlock designed for industrial machine guarding and perimeter protection. It operates magnetically without an actuator and is intended for use where a waterproof enclosure and Compact form factor are required. The device connects via an 8-pin M12 cable plug and provides reed contact outputs alongside LED status indication for straightforward integration into safety systems.

• IP67 enclosure rating provides protection in wet environments
• Reed contact outputs allow low-voltage switching up to 30V DC
• Magnet lock type enables actuatorless magnetic actuation
• Flexi Loop support permits safe series connection with diagnostics
• Operating range from -30°C to 60°C suits varied conditions

• Suitable for safeguarding production machinery with waterproof requirements
• Used with conveyor guards where non-contact detection is needed
• Ideal for series wiring in safety circuits requiring diagnostics
• Can be used for perimeter doors in wet processing areas
• Used for integration into safety logic units in factories

It provides switching at up to 30V DC and contact ratings compatible with 230V AC for safety circuits.

A 0.2m cable with an M12 8-pin plug and copper conductors is supplied for connection.

It includes one signalling contact and LEDs for status indication, with Flexi Loop enabling diagnostic communication.

The housing endures vibration at 10Hz to 55Hz with 1mm amplitude and shock up to 30g for 11 ms.