SICK RE13 Safety Interlock Switch, Magnet, Vistal, Magnet

This safety interlock switch is a non-contact magnetic device designed to monitor access points in industrial settings. It operates as a sensor with a separate actuator, using reed-type outputs to signal guard positions. The unit is intended for installation outside hazardous zones and connects via a 0.2m cable with an M8 4-pin connector. It is suitable for environments where a Compact footprint and sealed protection are required.

• 2 safety contacts provide straightforward switching for safety circuits
• Magnetic locking offers contactless actuation for reduced wear
• Switching current up to 100mA supports low-power safety inputs
• IP67 enclosure rating permits wash-down and dust-tight applications
• Operating range from -30°C to +60°C maintains performance across temperatures

• Suitable for interlocking guarded machine access points
• Ideal for integration with safety logic units requiring reed outputs
• Used with metal-actuated guards in manufacturing lines
• Can be used for access monitoring in packaging machinery
• Used for retrofit safety upgrades where Compact size is needed

The switch has no internal fault detection, so the connected safety logic unit must perform fault monitoring.

The reed contacts switch at up to 30V DC and are rated for contact currents up to 100mA.

The unit connects via a 0.2m PVC cable with an M8 male 4-pin connector and nickel-plated coupling nut.

The housing is MADE from VISTAL® and the product holds IEC 60529 IP67 rating Plus multiple regional conformity certificates.

The sensor offers five actuation directions and one Active sensing surface.