SICK RE27 Safety Switch Actuator Included, Vistal, Magnet

This safety switch is a non-contact magnetic sensor system designed to secure access points in industrial machinery. It operates with reed-type outputs and a separate actuator included, providing a monitored Interface for safety logic units. The device is suitable for environments requiring sealed protection and performs across a wide ambient temperature range while signalling status via LEDs.

• IEC60529 protection provides dust and water resistance
• Reed contact outputs support low-voltage signalling
• 20m cable enables remote connection to control units
• Magnet lock type ensures contactless actuation
• Multi-directional head offers versatile approach angles

• Suitable for guarding hinged safety doors on production lines
• Ideal for integration with safety controllers in packaging plants
• Used with conveyors where sealed sensors are required
• Can be used for access monitoring in wet environments
• Suitable for installations demanding long cable runs

It switches up to 30V DC on reed contacts and is rated for 230V AC contact operation with 24V DC signalling circuits.

The unit lacks internal fault detection and relies on the connected safety-related logic unit for fault monitoring and safe-state determination.

The enclosure is rated to IP67 per IEC60529 and it meets vibration and shock levels defined in EN 60947-5-3.

The device operates and may be stored within the same range of -30°C to +60°C.

It provides two N/O contacts and one signalling contact configured for status indication via an LED.