제조사부품번호

Honeywell Technologies CPS Rope Pull Switch 172.72 mm, Straight, 2 NO/2 NC

RS 제품 번호:: 820-3339
제조사 부품 번호:: 1CPSC2A
제조업체:: Honeywell

Honeywell Technologies CPS Rope Pull Switch 172.72 mm, Straight, 2 NO/2 NC

Subtotal (1 unit)*

₩1,814,480.00

4 개 단위 배송 준비 완료
추가로 2026년 12월 21일 부터 10 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,814,480.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 820-3339
제조사 부품 번호:: 1CPSC2A
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Rope Pull Switch
	Contact Configuration	2 NO/2 NC
	Indicator Type	LED
	Mounting Orientation	Straight
	IP Rating	IP67
	Number of Cable Entries	3
	Series	CPS
	Minimum Operating Temperature	-25°C
	Reset Button	Yes
	E-Stop Button	Yes
	Contact DC Voltage	250V dc
	Contact AC Voltage	600V ac
	Contact Current	10A
	Maximum Operating Temperature	80°C
	Length	172.72mm
	Width	99.06mm
	Standards/Approvals	CSA, CE, ISO, EN, UL, SIL
	Depth	62.2mm
	Housing Material	Die Cast Zinc
	Hazardous Area Certification	No
	Mechanical Life	1000000Operations
	Conduit Entry	20 mm

	모두 선택
	브랜드 Honeywell
	Product Type Rope Pull Switch
	Contact Configuration 2 NO/2 NC
	Indicator Type LED
	Mounting Orientation Straight
	IP Rating IP67
	Number of Cable Entries 3
	Series CPS
	Minimum Operating Temperature -25°C
	Reset Button Yes
	E-Stop Button Yes
	Contact DC Voltage 250V dc
	Contact AC Voltage 600V ac
	Contact Current 10A
	Maximum Operating Temperature 80°C
	Length 172.72mm
	Width 99.06mm
	Standards/Approvals CSA, CE, ISO, EN, UL, SIL
	Depth 62.2mm
	Housing Material Die Cast Zinc
	Hazardous Area Certification No
	Mechanical Life 1000000Operations
	Conduit Entry 20 mm

COO (Country of Origin):: US

Honeywell 1CPS Cable Pull Safety Switches

The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.

The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.

For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.

Direct opening actions of normally closed contacts

Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations

Typical 76 meter cable span

Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)

Die cast zinc housing

Both gold plated or silver plated contacts available

Optional hardware packs available

UL, CE, CSA, SIL 3 capable

Honeywell Technologies CPS Rope Pull Switch 172.72 mm, Straight, 2 NO/2 NC

Honeywell 1CPS Cable Pull Safety Switches

관련된 링크들