제조사부품번호

SICK I150 Rope Pull Switch 203 mm, 2 NC

RS 제품 번호:: 285-1830
제조사 부품 번호:: I150-RP224 / 1064511
제조업체:: SICK

Subtotal (1 unit)*

₩499,100.00

2 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩499,100.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 285-1830
제조사 부품 번호:: I150-RP224 / 1064511
제조업체:: SICK

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SICK
	Product Type	Rope Pull Switch
	Contact Configuration	2 NC
	IP Rating	IP65
	Series	I150
	Minimum Operating Temperature	-25°C
	Contact DC Voltage	5V dc
	Contact Current	2A
	Maximum Operating Temperature	80°C
	Housing Material	Metal
	Standards/Approvals	China RoHS, cULus, EU DoC, IEC, UKCA
	Width	69mm
	Depth	85mm
	Length	203mm
	Hazardous Area Certification	No
	Mechanical Life	106Cycles

	모두 선택
	브랜드 SICK
	Product Type Rope Pull Switch
	Contact Configuration 2 NC
	IP Rating IP65
	Series I150
	Minimum Operating Temperature -25°C
	Contact DC Voltage 5V dc
	Contact Current 2A
	Maximum Operating Temperature 80°C
	Housing Material Metal
	Standards/Approvals China RoHS, cULus, EU DoC, IEC, UKCA
	Width 69mm
	Depth 85mm
	Length 203mm
	Hazardous Area Certification No
	Mechanical Life 106Cycles

COO (Country of Origin):: DO

SICK I150 Series Rope Pull Switch, 203mm Length, Metal Housing - I150-RP224 / 1064511

This rope pull switch provides a manually operated safety cut-off for industrial lines and conveyor systems, designed for single-direction actuation and remote rope routing up to 75m. It features positive-action normally-closed contacts and a slow-action switching element suited to low-voltage safety circuits. The unit is housed in varnished die-cast lightweight metal and rated for protected use in dust- and water-prone environments.

Features and Benefits:

• 2NC contacts providing positive-action safety switching
• 2A current rating enabling low-voltage control circuits
• IP65 enclosure protecting against dust and water ingress
• Mechanical life 1e6 cycles supporting extended service intervals
• Operating range -25 to 80°C allowing wide ambient deployment

Applications

• Suitable for conveyor emergency-stop rope installations
• Ideal for long-run rope systems up to 75m
• Used with safety logic units requiring slow-action switching
• Can be used at sites requiring cULus and UKCA certification
• Used for safeguarding accessways in manufacturing plants

How is fault detection handled in this device?

It contains no internal fault detection, so connected safety logic must monitor faults.

What electrical connection does it use?

It connects via an M12 4-pin plug connector with a nickel-plated brass coupling nut.

What are the switching voltage and minimum switching current?

The switching threshold is ≥5V DC and the switching current specified is 5mA at 5V DC.

What short-circuit protection is required?

Short-circuit protection rated at 2A is specified for the switching circuit.

What mechanical actuation characteristics affect installation?

Actuation force is 125N at 300mm deflection and actuation frequency is ≤3,600 operations per hour.