Telemecanique Sensors XY2CE Rope Pull Switch, 70m, NO/NC
- RS 제품 번호:
- 130-0879
- 제조사 부품 번호:
- XY2CE6A270
- 제조업체:
- Telemecanique Sensors
Subtotal (1 unit)*
₩610,511.20
재고있음
- 1 개 단위 배송 준비 완료
- 추가로 2026년 2월 26일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩610,511.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 130-0879
- 제조사 부품 번호:
- XY2CE6A270
- 제조업체:
- Telemecanique Sensors
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Telemecanique Sensors | |
| Normal State Configuration | NO/NC | |
| Cable Length | 70m | |
| IP Rating | IP66 | |
| Number of Poles | DPST | |
| Series | XY2CE | |
| Range | Preventa XY2 | |
| Length | 229mm | |
| Width | 105mm | |
| Depth | 142mm | |
| Housing Material | Stainless Steel | |
| Conduit Entry | PG13.5 | |
| Minimum Operating Temperature | -25°C | |
| Dimensions | 229 x 105 x 142mm | |
| Maximum DC Voltage | 250V | |
| Maximum Operating Temperature | +70°C | |
| Standards Met | CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508 | |
| Maximum AC Voltage | 240V | |
| 모두 선택 | ||
|---|---|---|
브랜드 Telemecanique Sensors | ||
Normal State Configuration NO/NC | ||
Cable Length 70m | ||
IP Rating IP66 | ||
Number of Poles DPST | ||
Series XY2CE | ||
Range Preventa XY2 | ||
Length 229mm | ||
Width 105mm | ||
Depth 142mm | ||
Housing Material Stainless Steel | ||
Conduit Entry PG13.5 | ||
Minimum Operating Temperature -25°C | ||
Dimensions 229 x 105 x 142mm | ||
Maximum DC Voltage 250V | ||
Maximum Operating Temperature +70°C | ||
Standards Met CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508 | ||
Maximum AC Voltage 240V | ||
Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
Note
The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.
Standards
EN/ISO 13850:2006
관련된 링크들
- Telemecanique Sensors XY2CE Rope Pull Switch, 70m, 2NC
- Telemecanique Sensors XY2CE Rope Pull Switch, 70m, NO/NC
- Telemecanique Sensors XY2CE Rope Pull Switch, 70m, 2NO/2NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, 2NC, Right Side
- Telemecanique Sensors XY2 Rope Pull Switch, 70m, NO/NC, Right Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2NO/2NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, NO/NC, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, NO/NC, Right Side